Important Safety Instructions - Sharp DR-430 User Manual

Important safety
instructions
Please follow all safety instructions
and heed all warnings. Keep this
manual for future reference.
This symbol instructs the user to consult
the user manual for further safety,
operational and maintenance related
information.
Refers to class II equipment.
This symbol indicates that this product
has a double insulation system and
does not require a safety connection to
electrical earth (ground).
Refers to alternating current (AC).
This symbol indicates that the rated
voltage marked with the symbol is AC
voltage.
Refers to direct current (DC).
This symbol indicates that the rated
voltage marked with the symbol is DC
voltage.
For indoor use only
Energy efficiency marking with level VI
Polarity of d.c. power connector
Precautions
Child safety
• Always follow basic safety precautions when
using this product, especially when children
are present. Children should be supervised to
ensure that they do not play with the product.
Location
• The product should be installed in a stable
location and ensure the product and its parts
are not overhanging.
Ventilation
• Slots and openings in the cabinet are provided
for ventilation to ensure reliable operation of
the product and to protect it from overheating;
these openings must not be blocked or covered.
Ensure a minimum distance of 5 cm around
the product for sufficient ventilation. Never let
anyone push anything into holes, slots or any
other openings in the product's casing as this
could result in an electric shock.
Heat and operating temperature
• Do not install near any heat sources such
as radiators, heat registers, stoves or other
apparatus (including amplifiers) that produce
heat. Avoid exposure to direct sunlight.
Naked flames
• To prevent the risk of fire, keep candles or open
flames away from this product.
Water, moisture and liquid entry
• To prevent the risk of fire or electric shock,
do not expose this product to rain, water or
moisture. Do not place objects filled with liquids
on or near this product.
Storms and lightning
• Storms are dangerous for all electric products. If
the power or aerial wiring is struck by lightning
the product might get damaged, even if it is
turned off. You should disconnect all cables and
connectors from the product before a storm.
Power cable
• Do not damage, stretch, bend or place heavy
objects on the power cable.
Damage
• Please inspect the unit for damage after
unpacking. If it is damaged in any way do not
operate the unit and consult your dealer.
Maintenance
• Unplug the power cable from the power source
before cleaning the product. Use a soft and
clean cloth to clean the outside of the unit.
Never clean it with chemicals or detergent.
Service and repair
• This product does not contain any parts that are
serviceable by the user. Exposing the internal
parts inside the device may endanger your life.
In case of a fault, contact the manufacturer
or authorised service department. The
manufacturers guarantee does not extend
to faults caused by repairs carried out by
unauthorised third parties.
Power Adapter
• If the unit will not be used for a period of time
it it recommended to switch the unit off and
remove the AC power plug from the mains
outlet.
EN