Table of Contents
Advertisement
Maintenance:
The beacons are designed to be maintenance free. Refer to the guide below for help with troubleshooting.
Should the unit be diagnosed as malfunctioning, remove unit and replace with a new beacon.
WARNING!
Problem
Beacon does not activate
Beacon is constantly ON (not
flashing)
LED beacon housings may become hot with extended use. Allow beacons to cool completely
before attempting to remove.
TROUBLESHOOTINg
Probable Cause
a. No power to unit
b. Power input wire reversed
c. Damaged or shortaged cabling
d. Defective beacon
a. Pattern select wire permanently
grounded or shorted to GND
9
Remedy
a. Check wire for loose connection
b. Reverse power wires
c. Check cables for damage
d. Replace beacon module
a. Avoid permanent grounding of
pattern select wire
Advertisement
Table of Contents
Need help?
Do you have a question about the ARCH Beacon and is the answer not in the manual?
Questions and answers