Installing On A Wall - LG 55VH7BAW-9P Owner's Manual

Installing on a Wall

To install the Monitor on a wall (optional), use the
VESA screws provided as accessories to fasten it.
100 mm
100 mm
100 mm
Install the monitor at least 200 mm (7.8 inches)
away from the wall and leave about 100 mm
(3.9 inches) of space at each side of the monitor to
ensure sufficient ventilation.
Use the wall mount plate and screws that comply
with the VESA standard.
200 mm
(7.8 inches)
100 mm
(3.9 inches)
CAUTION
• Disconnect the power cord before moving or
installing the monitor to avoid risk of electric
shock.
• If you install the monitor on a ceiling or slanted
wall, it may fall and result in injury. Use an
authorized LG wall mount and contact your local
dealer or qualified personnel to assist with the
installation.
• Do not over tighten the screws as this may
damage the monitor and void your warranty.
• Use only screws and wall mounting brackets
that meet the VESA standard. Any damage or
injuries caused by misuse or use of improper
accessories are not covered by the warranty.
NOTE
• Do not install the product in a place with no
ventilation (e.g., on a bookshelf or in a closet)
or on a carpet or cushion. If there is no other
option but to mount the product on the wall,
make sure that sufficient ventilation is provided
before installation.
- Failure to do so may result in a fire due to the
increase in the internal temperature.
• The illustration shows a general example of
installation and may look different from the
actual product.
11