10
STORAGE METHOD FOR PANEL PROTECTION
Correct Method
Panel
If the product needs to be set upright, hold both
sides of the product, and tilt backward carefully for.
Do not let the panel to touch the floor.
Panel
When laying down the product, lay a cushion on
a flat floor. Put the product on it with the panel of
the product facing down.
If there is not a cushion available, ensure the floor
is clean and then lay the product down carefully
with the panel facing either upward or downward.
At this time, be careful for objects not to fall on the
panel.
Cushion
Panel
Incorrect Method
Panel
If the product is tilted onto the bezel, the bottom
of the panel may be damaged.
Panel
If the product is tilted onto the edge of the panel,
the panel may be damaged.