Pairing The Remote Control - Epson CO-FH02 User Manual

Note: With Epson's Instant Off technology, there is no cool-down period so you can pack up the
projector for transport right away (if necessary).
Caution: Do not turn the projector on immediately after turning it off. Turning the projector on and off
frequently may shorten the life of the lamp.
3. To transport or store the projector, make sure the status light is off, then unplug the power cord and
any other connected devices or cables.
Caution: To avoid damaging the projector or lamp, never unplug the power cord when the status
light is on or flashing.
Parent topic:

Pairing the Remote Control

To use Android TV and video-on-demand features, you must pair the remote control to the projector.
Note: When you first turn on the projector, instructions for pairing the remote control are displayed on
the screen.
1. Turn on the projector.
2. When the pairing screen is displayed, press and hold the
remote control until the indicator starts blinking.
Using Basic Projector Features
volume down and Enter buttons on the
39