Table of Contents
Advertisement
Figure 13. The System panel
The parameters set up in the System panel are listed in Table 12.
Table 12. Device set-up registers. The values in the gray fields in the table are given
in the phase of production. Any subsequent modification by the user is impossible.
Parameter name
Device type
Software version
Hardware version
Device address
Serial No.
Device name
Access password
System time
Language
Laser
Counting start
5.5.2 Interfaces-selection
This panel allows the user to select the interface to set up and monitor the quality
parameters of the interface and its activation.
IOA77-1F
4
E1/G.703 P
X
LESIOCHRONOUS
O
PERATING
Allowed status
TM – 77
---
---
---
---
16 – character text
8 – character text
Digits for individual
elements of date and time
Polish or English
Full power
Two digits for hour and
minute
M
ULTIPLEXER
M
ANUAL
Default
Description
value
---
Type of configured device
---
Device software version number
---
Device hardware version
---
Device address given in production
Number given to the device in
---
production
TM – 77.1
Any device name given by the user
Password protecting from
---
unauthorized access to the device
System clock arrangement:
---
Date – yyyy,mm,dd
Time – hh,mm,ss
Polish
Language selection
---
Laser transmitter operation status
Hour and minute of count start for ES
00:00
and SES registers in the following
arrangement: hh,mm
25
May 2007
Advertisement
Table of Contents
