Detailed Features - Digigram NCX 200 User Manual

D i g i

DETAILED FEATURES

Audio outputs (when available)
Analog outputs
• 2 or 4 balanced analog outputs
(available on SubD15)
• 2 unbalanced analog outputs (on RCA or 3.5mm
stereo jack)
• output impedance < 100 ž.
• maximum level : +10dBu on balanced outputs -
+4dBu on unbalanced outputs (software
adjustable)
• output level adjustment : down to - 91.5dBu by
0.5dB steps.
• 24 bits digital to analog converters
(128 x oversampling delta-sigma converters).
• Sampling frequencies : 8, 11.025, 16, 22.05, 24,
32, 44.1, 48 kHz
Headphone output
• 3.5mm stereo jack
• Source impedance : 100 ž
Audio inputs (when available)
Analog inputs
• 2 or 4 balanced analog inputs
(available on SubD15)
• output impedance > 10k ž.
• maximum level : +10dBu (line level) or - 26dBu
(mic 1 level) or - 37dBu (mic 2 level)
• 24 bits digital to analog converters (128 x
oversampling delta-sigma converters).
• Sampling frequencies : 8, 11.025, 16, 22.05, 24,
32, 44.1, 48 kHz
Analog performances
4
g r a m
Characteristics are measured at 48 kHz sampling
frequency, in linear (PCM) mode.
• Signal / Noise ratio (un-weighted) : better than 94
dB.
• Total Harmonic Distortion + Noise (un-weighted):
better than - 85 dB (0.0056%)
with 1kHz signal, -2dBFs.
• Frequency response (20Hz/20kHz) : ± 0.1 dB .
• Difference in phase (20Hz/20kHz) : 0.2° / 2°
• Crosstalk at 1kHz : better than - 95 dB
Physical
• Cabinet dimensions : 175mm x 175mm x 45mm
• The cabinet includes a metallic shell
Power consumption (typical)
• + 5V input : 1.5A
• AC power : 25VA
Environmental
Temperature:
• Storage : -5°C / +70°C
• Operating : 0°C / +50°C
Humidity (non condensing):
• Storage : 0% / 95%
• Operating : 5% / 90%