User Setting Interface - Gree JKFD5DQS/Na-E Service Manual

"ON/OFF": As it is touched, the system will issue a command to change the ON/OFF state.
The hint information on the button will accordingly change to the current controlled running
state of entire module. If the "ON/OFF" button shows that the current state is OFF and it is
touched afterwards, the hint information on the button will change to "ON" meanwhile the
start-up command will be issued by the system which is valid to the entire unit combined with
modules. If needed to start each module unit, ON/OFF should be set in "User Setting→module
setting".
"Remote Monitoring": When main module, communication module and monitoring
computer are connected with each other correctly and software for remote monitoring is
executed, "Remote Monitoring" will emerge. When the software is closed or the communication
paused, the "Remote Monitoring" will disappear.
"Error": It means there is malfunction. Related error information can be consulted on
"Event Log"→ "Current Error"
"Shield Touch Screen": It means the touch screen has been shielded and all parameters
cannot be set up unless by the "shielding/cancel shielding" operation of remote monitoring.
"Quick Test"： It means the touch screen enters into a quick testing status. This is only used
for tests in the factory.
The above-mentioned "Remote Monitoring", "Error", "Shield Touch Screen" and "Quick
Test" are not command buttons, but indications of events that occur to the touch screen.
Note: Touch screen takes 1 minute to save the set data, which means the set data or
change of command will be saved to FLASH inside the touch screen after 1 minute. If power is
off right after the setting, then the set data won't be saved because there is not enough time for
saving, in which case, touch screen will still operate and display according to the previous
parameters when it is re-energized.

2.3 User Setting Interface

（1）Humid&Temp. Setting Interface
This interface provides the customer with the setting for the unit temp., the unit humidity
and their precision. The setting parameters are effective to the entire unit with combined
modules.
ТОО "Everest climate", Р. К., г.Алматы | Телефон: +7 727 230 00 10, +7 777 250 10 90 | www.aircon.kz, e-mail: info@aircon.kz