Table of Contents
Advertisement
Quick Links
Thank you for purchasing the Lifemax Wireless Solo-Call system.
Your Solo-Call system includes a Transmitter Unit to connect to your choice of Lifemax
Sensor Mat and a rechargeable Pager Unit to pick up an alarm signal within a 30 metre
range, when the sensor mat is activated. The Pager unit has options of an audio alarm,
vibration alarm or both.
The Solo-Call is ideal for helping people with reduced mobility who may take a fall,
or for ensuring a loved one does not wander off, by providing an early warning of any
danger. It is simple to use and reduces the burden on any care giver by providing them
with a versatile, reliable monitoring system.
Your Solo-Call system includes:
• a Transmitter Unit;
• a Pager Unit with USB Docking Station;
• a Belt Clip, Fixing Strap and Wall Mounting Bracket;
• this Instruction Manual.
To ensure you get the best from your Solo-Call system, you should read and understand
this manual before use. Please carefully follow the setup instructions and test your new
system thoroughly before relying on it.
Failure to read and observe this manual puts both the carer and patient at risk.
Lifemax Limited
1 Pipers Court, Thatcham,
RG19 4ER. United Kingdom.
www.lifemaxuk.co.uk
T: 01635 874323
1510 Wireless Solo Call Instructions_160927.indd 1
1510 - Wireless Solo-Call
P/N: OPKOTS1502IM0
27/09/2016 15:00:59
Advertisement
Table of Contents
Summary of Contents for Lifemax Wireless Solo-Call
- Page 1 Thank you for purchasing the Lifemax Wireless Solo-Call system. Your Solo-Call system includes a Transmitter Unit to connect to your choice of Lifemax Sensor Mat and a rechargeable Pager Unit to pick up an alarm signal within a 30 metre range, when the sensor mat is activated.
- Page 2 Installation and Setup Transmitter Pager Power Power Battery Broken Link Battery Trans. Input Battery Battery Socket Charging Charging Dock Power Multi- Switch Position Switch Screw Slot Screw Slot Learn Link Mode Learn Link Delay Lock Pin Lock Pin 1510 Wireless Solo Call Instructions_160927.indd 2 27/09/2016 15:00:59...
- Page 3 Please carefully follow these setup instructions and test your new system thoroughly before relying on it. Pager Unit Charging The Pager Unit should be thoroughly charged before first use, as follows: Plug the USB cable into a suitable USB adapter or socket (not supplied); Stand the charging dock on a firm surface and place the Pager Unit into the recess;...
- Page 4 Attaching the Sensor Mat The Solo-Call Transmitter will accept any Lifemax Sensor Mat. To attach the Sensor Mat, plug the RJ9 connector into the input socket. Setting the Detection Mode and Delay Setting The Solo-Call system can be used with a chair or bed sensor mat. Commonly, this will alarm when pressure is relieved from the mat as the patient leaves the chair/bed.
-
Page 5: Operation
Operation After completing the installation and setup, the Solo-Call system will begin working correctly after both the transmitter and pager units have been powered off and on again, as follows: Turn the transmitter unit off and on by sliding the power switch upwards and then downwards;... -
Page 6: Safety Warnings
Lifemax Sensor Mats are consumable items and should be replaced when they become worn or soiled. Using an excessively worn sensor mat will reduce the effectiveness of the Solo-Call system. -
Page 7: Battery Guidance
Remove old batteries from device and follow local recycling guidance. Warranty Card In the unlikely event that your Lifemax Wireless Solo-Call develops a manufacturing fault, it is covered by a one year return to base warranty when you return this card. -
Page 8: Specification
Temperature Transmission Up to 30m Distance Operating 868.30 MHz ± 200kHz Frequency Warranty Card 1510 - Wireless Solo-Call Name: Address: Telephone: Email: Retailer: Date Purchased: We would like to keep you up to date with other helpful products. If you would rather we did not, please tick here.