Auto-Off Function; Using The Auxiliary Input - Panasonic SC-GT07 Owner's Manual

Basic playback
1
Press [`] to turn on the system.
2
Insert the iPod/iPhone.
Status indicator: Green
3
Press [4/9] to start playback.
Pause Press [4/9].
playback Press again to continue playback.
Skip track Press [2] or [6].
Search track Press and hold [2] or [6].
View iPod Press [iPod MENU].
menu
Select an item Press [R, T] and then press [OK].
Note:
• After you insert the iPod/iPhone, the system will check
the connection and the green indicator blinks.
• Depending on the model, it may be necessary to
remove the iPod/iPhone and select the album, artist,
etc. on the iPod/iPhone.
• The system automatically switches on when you
connect an iPod/iPhone that is in playback mode
(except for some models).
• Operation results may vary depending on the iPod/
iPhone models.
• Read the User Guide of the iPod/iPhone for the
operating instructions.
Compatible iPod/iPhone
(as of February 2012)
Update your iPod/iPhone with the latest software before
using this system.
iPod touch
1st, 2nd, 3rd and 4th generation
iPod nano
2nd, 3rd, 4th, 5th and 6th generation
iPod classic
iPhone 4S / iPhone 4 / iPhone 3GS / iPhone 3G /
iPhone
For up to date compatibility information, refer to:
http://panasonic.jp/support/global/cs/
Charging an iPod/iPhone
An iPod/iPhone is charged automatically when
connected to the system (even when the system is in
standby mode).
• See the iPod/iPhone display for its battery charging
status.
• Disconnect the iPod/iPhone if it is not used for an
extended period of time after charging is complete.
• Charging stops when the battery is fully charged. The
battery will deplete naturally.
Auto off function
The system automatically switches off if there is no
audio input and when you do not use it for approximately
30 minutes.
1
Press [iPod/AUX] to select AUX mode.
Status indicator: Off
2
Press and hold [OK].
On (default) ↔ Off
On: The green status indicator blinks 1 time,
followed by the amber status indicator blinking
2 times.
Off: The green status indicator blinks 1 time,
followed by the amber status indicator blinking
1 time.
Note:
1 minute before the system switches off, the power
indicator blinks.

Using the auxiliary input

You can connect portable audio equipment and listen to
the audio through this system.
Preparation
Switch off the equalizer (if any) of the portable audio
equipment to prevent sound distortion.
Decrease the volume of the system and the portable
audio equipment before you connect or disconnect the
portable audio equipment.
Audio cable
(not supplied)
Portable audio
equipment (not supplied)
1
Connect the portable audio equipment.
Plug type: Ø 3.5 mm (⅛") stereo
2
Press [iPod/AUX] to select AUX mode.
Status indicator: Off
3
Play the portable audio equipment.
Note:
• Read the operating instructions of the portable audio
equipment for details.
• Components and cables are sold separately.
To adjust the audio input level
Press [INPUT LEVEL].
Normal (default) ↔ High
Note:
• Select "High" if the output level is too low even when
you have increased the volume.
• Select "Normal" if there are abnormalities or the sound is
distorted during "High" input level.
7
7