Advertisement
Quick Links
Freedom Rack with M6 Adjustable Rails
and Freedom Rack Accessories
The Freedom Rack with M6 Adjustable Rails (product code RM490A-R2) not only provides a solid framework
for storing your equipment, it's also fully depth-adjustable to best fit your devices. This installation guide
describes how to assemble the rack and how to install its Vented Equipment Shelf (RM491-R2) and Equipment
Support Bracket (RM492-R2). If you ordered just the Freedom Rack, besides this installation guide, you should
have received the following parts:
• (4) Steel uprights with 3" (7.6-cm) channel.
• (2) Top angles.
• (2) Base pieces.
• (4) Three-piece depth spacers (each with two side brackets and a center bracket).
• (36) each (although only 28 are required for assembly):
• (4) of each for each depth spacer ([16] of each total):
washers.
To assemble these parts into the Freedom Rack, you'll need two box-end wrenches, one
CUSTOMER
SUPPORT
INFORMATION
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746
Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018
Web site: www.blackbox.com • E-mail: info@blackbox.com
RM490A-R2
RM491-R2
3
3
⁄
"-16 x
⁄
" hex-head bolts and
8
4
1
⁄
"-20 x
5
⁄
" carriage bolts,
4
8
MAY 2003
RM492-R2
3
⁄
" split lockwashers.
8
1
⁄
"-20 hex nuts, and
1
⁄
" flat
4
4
7
⁄
" and one
9
⁄
".
16
16
999-0313
Advertisement
Related Manuals for Black Box RM490A-R2
Summary of Contents for Black Box RM490A-R2
- Page 1 Freedom Rack with M6 Adjustable Rails and Freedom Rack Accessories The Freedom Rack with M6 Adjustable Rails (product code RM490A-R2) not only provides a solid framework for storing your equipment, it’s also fully depth-adjustable to best fit your devices. This installation guide describes how to assemble the rack and how to install its Vented Equipment Shelf (RM491-R2) and Equipment Support Bracket (RM492-R2).
- Page 2 FREEDOM RACK WITH M6 ADJUSTABLE RAILS AND FREEDOM RACK ACCESSORIES The Freedom Rack with M6 Adjustable Rails measures 84"H x 20.19"W (213.4 x 51.3 cm) when fully assembled, ⁄ " and can be adjusted in increments of (1.3 cm) to any depth from 27" to 32" (68.6 to 81.3 cm). (The rack’s actual total depth will be between 30"...
- Page 3 FREEDOM RACK WITH M6 ADJUSTABLE RAILS AND FREEDOM RACK ACCESSORIES Assembling and Installing the Freedom Rack with M6 Adjustable Rails (RM490A) 1. Place two of the four uprights on a flat surface, approximately 20" (50.8 cm) apart. The upright channels should face inward.
- Page 4 FREEDOM RACK WITH M6 ADJUSTABLE RAILS AND FREEDOM RACK ACCESSORIES Use these holes For this depth: 1 and 3 27" (68.6 cm, minimum) 2 and 4 28" (71.1 cm) 3 and 5 29" (73.7 cm) 4 and 6 30" (76.2 cm) 5 and 7 31"...
- Page 5 FREEDOM RACK WITH M6 ADJUSTABLE RAILS AND FREEDOM RACK ACCESSORIES Installing the M6 Freedom Vented Equipment Shelf 32"D (RM491-R2) or M6 Freedom Equipment Support Bracket (RM492-R2) The bracket is designed to fit across the front or (most often) the rear of the rack and support heavy, deep equipment.
- Page 6 FREEDOM RACK WITH M6 ADJUSTABLE RAILS AND FREEDOM RACK ACCESSORIES 3. Slide the flange legs into the cutouts and insert two of the 12-24 screws included with the M6 Freedom Shelf or Bracket (which are all of the screws included with the bracket) through the screwholes in the left and right flanges and cage nuts.
- Page 7 FREEDOM RACK WITH M6 ADJUSTABLE RAILS AND FREEDOM RACK ACCESSORIES 6. Align the holes along the sides of the flat surface of the shelf with the holes in the tops of the brackets. To secure the shelf in place, push two of the four included plastic canoe clips through the flat part of the shelf into the front bracket (one on the right side, one on the left), then push the other two into the rear bracket.
- Page 8 Mounting bracket 1.4" (3.6 cm) dimensions: 17.5" (44.5 cm) 19" 2" (5.1 cm) (48.3 cm) © Copyright 2003. Black Box Corporation. All rights reserved. 1000 Park Drive • Lawrence, PA 15055-1018 • 724-746-5500 • Fax 724-746-0746...