Related Manuals for Black Box NetRack RM500A-R2
Summary of Contents for Black Box NetRack RM500A-R2
- Page 1 © Copyright 2000. Black Box Corporation. All rights reserved. 1000 Park Drive • Lawrence, PA 15055-1018 • 724-746-5500 • Fax 724-746-0746...
-
Page 2: Customer Support Information
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500) FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746 SUPPORT Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018 INFORMATION Web site: www.blackbox.com • E-mail: info@blackbox.com... - Page 4 NETRACK The NetRack These fully welded and assembled racks are constructed of heavy 12-gauge steel. The mounting angles, also made of 12-gauge steel, are tapped with #10-32 thread in the E.I.A. RS 310-D universal pattern. There’s ample space inside the frame sides for cabling, so large bundles of wire and cable fit without a problem. Plus, there’s a locking door with a “slam latch”...
- Page 5 NETRACK Bottom-Mount Tower Shelves (RM502, RM507) The following items are included with the RM502 or RM507. Table 1. Items included with the RM502 or RM507 Description Quantity Support plate ⁄ -20 x ⁄ " hexbolt ⁄ -20 x ⁄ " carriage bolt ⁄...
- Page 6 NETRACK Figure 1. Attaching support plates to the cabinet base. 2a. Loosely attach the slide bracket (item 4) to the rear of the slide (item 5) as shown below, using two 10-32 x ⁄ " panhead screws (item 6) and two 10-32 hexnuts (item 7). Do not tighten at this time. Figure 2.
- Page 7 NETRACK 3a. Extend the inner slide members of slides to the front of the unit until they lock in place. Take the shelf assembly (item 9) and carefully insert slide members attached to the inside of the shelf into extended slide members.