Page 2
Our Brands: FlinQ | iProtect | Park Assist | ParkEyes | Siqura | VDG Installations in over 80 countries Revision history Date Remarks 9-okt-2022 Version 2.1 reworked into new format TKH Security B.V. | +31 182 592 333 | info.nl@tkhsecurity.com | tkhsecurity.com...
Page 3
Any brand names mentioned in this manual are registered trademarks of their respective owners. Liability TKH Security accepts no liability for claims from third parties arising from improper use other than that stated in this manual. Although considerable care has been taken to ensure a correct and suitably comprehensive description of all relevant product components, this manual may nonetheless contain errors and inaccuracies.
We are committed to delivering high-quality products and services. The information given in this manual was current when published. As we continuously seek to improve our products and user experience, all features and specifications are subject to change without notice. TKH Security B.V. | +31 182 592 333 | info.nl@tkhsecurity.com | tkhsecurity.com...
Installations in over 80 countries 2 Functions overview This chapter gives an overview of the functions offered by the PD900/PD910/PD920. It also gives information about the package contents, camera dimensions and connectors. In the PD910/PD920, the bubble-less mechanical is introduced for the crystal clear images without any distortion.
Rubber stopper Cautions: If you use an external power supply, contact TKH Security to make sure that the power supply has the proper power specifications. Make sure that the power supply complies with LPS requirements. For PoE input connection, use only with UL listed I.T.E. with "PoE" output. Description for the "PoE" is intended to be connected to not exposed (outside plant) networks or equivalent statement in installaion instructions.
Page 9
Rubber stopper Cautions: If you use an external power supply, contact TKH Security to make sure that the power supply has the proper power specifications. Make sure that the power supply complies with LPS requirements. For PoE input connection, use only with UL listed I.T.E. with "PoE" output. Description for the "PoE" is intended to be connected to not exposed (outside plant) networks or equivalent statement in installation instructions.
Page 10
Rubber stopper Cautions: If you use an external power supply, contact TKH Security to make sure that the power supply has the proper power specifications. Make sure that the power supply complies with LPS requirements. For PoE input connection, use only with UL listed I.T.E. with "PoE" output. Description for the "PoE" is intended to be connected to not exposed (outside plant) networks or equivalent statement in installaion instructions.
Note: It is not recommended to continuously (24/7) record with the micro SD card, as the camera may not support long-term continuous data read/write. Contact the manufacturer of the micro SD card for information about the card’s reliability and life expectancy. TKH Security B.V. | +31 182 592 333 | info.nl@tkhsecurity.com | tkhsecurity.com...
Page 13
Note: It is not recommended to continuously (24/7) record with the micro SD card, as the camera may not support long-term continuous data read/write. Contact the manufacturer of the micro SD card for information about the card’s reliability and life expectancy. TKH Security B.V. | +31 182 592 333 | info.nl@tkhsecurity.com | tkhsecurity.com...
Page 14
Note: It is not recommended to continuously (24/7) record with the micro SD card, as the camera may not support long-term continuous data read/write. Contact the manufacturer of the micro SD card for information about the card’s reliability and life expectancy. TKH Security B.V. | +31 182 592 333 | info.nl@tkhsecurity.com | tkhsecurity.com...
3. Seal the cable entry hole of the mounting kit (see below) with thread seal tape to prevent water from entering the camera. 4. Fasten the M4 security screw with rubber on the cap. TKH Security B.V. | +31 182 592 333 | info.nl@tkhsecurity.com | tkhsecurity.com...
Page 16
Refer to chapter 4 for installation guide of NPS-NPT coupler. Note: The accessory “Rubber stopper” is available for PD900 and PD910. 6. The cables shall be applied with electrical plumber tape to prevent shortage caused by water.
12 VDC + Alternatively, connect an Ethernet cable to the RJ-45 connector of the camera, and use a UPoE power injector/switch to power the camera up. Consult TKH Security for more advise on the choise of UPoE powering devices. TKH Security B.V. | +31 182 592 333 | info.nl@tkhsecurity.com | tkhsecurity.com...
Alarm IN 4 Alarm OUT A1 Alarm IN 3 Alarm OUT A2 Alarm IN 2 Alarm OUT B1 Alarm IN 1 Alarm OUT B2 GND (Alarm I/O and RS-485) TKH Security B.V. | +31 182 592 333 | info.nl@tkhsecurity.com | tkhsecurity.com...
Page 19
Installation ManualPD900/PD910/PD920 Page 19 The Netherlands Our Brands: FlinQ | iProtect | Park Assist | ParkEyes | Siqura | VDG Installations in over 80 countries RS-485 D+ Audio IN TKH Security B.V. | +31 182 592 333 | info.nl@tkhsecurity.com | tkhsecurity.com...
Through Ethernet transformer coupling, this will induce a surge on the secondary side of the transformer, potentially damaging the Ethernet transceiver chip (often on the surveillance camera). More information, please refer to here (https://incompliancemag.com/article/designing-ethernet-cable-ports-to-withstand-lightning-surges/). TKH Security B.V. | +31 182 592 333 | info.nl@tkhsecurity.com | tkhsecurity.com...
4.2 Application Loading the applicator gun: make sure the applicator is setup with correct plunger attachment for cartridge. TKH Security B.V. | +31 182 592 333 | info.nl@tkhsecurity.com | tkhsecurity.com...
Page 22
While there is no need to remove the exposed adhesive sealant, the installer may at their discretion decide to smooth off the excess. TKH Security B.V. | +31 182 592 333 | info.nl@tkhsecurity.com | tkhsecurity.com...
Page 23
Avoid cleaning with alcohol as it will interfere with the curing process. If sealant is already cured, removal is done mechanically with razor knife, piano wire, sanding or 3M™ Scotch-Brite™ Molding Adhesive and Stripe Removal Disc. TKH Security B.V. | +31 182 592 333 | info.nl@tkhsecurity.com | tkhsecurity.com...
ActiveX control. The ActiveX control will allow for the same streaming performance as also found in your VMS client. (Caution: unsafe, requires camera ActiveX component installation) TKH Security B.V. | +31 182 592 333 | info.nl@tkhsecurity.com | tkhsecurity.com...
IP address .64 is already found to be in use. Default login information (Username / Password): Username: n/a Password: n/a TKH Security B.V. | +31 182 592 333 | info.nl@tkhsecurity.com | tkhsecurity.com...
(see the above table with default network settings). SDM2 Device Manager will auto discover the TKH Security device using different protocols and mechanisms. Normally, your device should appear in the device list within a couple of seconds. If the automatic discovery does not detect your device, follow these troubleshooting steps: 1.
If needed, use the zoom and focus function buttons on the home page to adjust the zoom and focus settings of the camera. For more information about the function buttons, refer to the user manual. TKH Security B.V. | +31 182 592 333 | info.nl@tkhsecurity.com | tkhsecurity.com...
Page 28
The Netherlands Our Brands: FlinQ | iProtect | Park Assist | ParkEyes | Siqura | VDG Installations in over 80 countries Figure 1 900-series cameras main web page TKH Security B.V. | +31 182 592 333 | info.nl@tkhsecurity.com | tkhsecurity.com...
You can set the video resolution on the Video configuration page of the camera’s web interface. The Video configuration page is found under the Streaming tab. For more information about video resolution combinations, refer to the user manual. TKH Security B.V. | +31 182 592 333 | info.nl@tkhsecurity.com | tkhsecurity.com...
To import a configuration file to the camera, follow these steps: 1. Click on Browse to select the configuration file. 2. Click on Upload to import the configuration file. TKH Security B.V. | +31 182 592 333 | info.nl@tkhsecurity.com | tkhsecurity.com...
If ActiveX control installation is blocked, either set the Internet security level to default or change the ActiveX controls and plug-ins settings. Set Internet security level to default 1. Start Internet Explorer. 2. Select Tools in the menu bar. 3. Select Internet options. TKH Security B.V. | +31 182 592 333 | info.nl@tkhsecurity.com | tkhsecurity.com...
Page 32
8. Click on Yes. 9. Click on OK to close the Internet Options window. 10. Close the browser window and open a new one later to access the camera. TKH Security B.V. | +31 182 592 333 | info.nl@tkhsecurity.com | tkhsecurity.com...
Need help?
Do you have a question about the PD900 and is the answer not in the manual?
Questions and answers