Table of Contents
Advertisement
Snap Server 12000
Reattaching the Power Cords and Ethernet Connectors
Make sure the switch on each
1
power module is in the off position.
Reconnect the AC power cords and
2
Ethernet connector to the back of
the server.
Turn on the power modules.
3
Restarting the Server
Once you have completed the replacement procedure, you must restart the system.
For more information, see the Administrator Guide or the Quick Start Guide.
Field Service Documentation
Copyright © 2009, Overland Storage, Inc. All rights reserved. Information in this document is subject to change without notice and does
not represent a commitment on the part of Overland Storage or any of its subsidiaries.
The Snap Server® 12000 Ethernet Card
Power module on/off
switch in off position
5
Advertisement
Table of Contents
Need help?
Do you have a question about the Snap Server 12000 and is the answer not in the manual?
Questions and answers