Advertisement
Available languages
Available languages
STEP 5-COMPLETING THE INSTALLATION
To complete the installation and system checkout requirements, the following steps must be
performed.
1.
Check the thermostat position. Make sure the thermostat is routed through the holding guide and is
not touching any metal surface.
2.
Secure the ceiling grille to the ceiling assembly wind-path with 4 screws. (see Figure 10).
3.
Install the healthy filter and air intake grill. Press "PUSH" and lock with clasps.
4.
Switch on the power supply and check the unit work or not.
5.
Once the indoor unit is assembled, if the gap between the panel and the top of vehicle
is not even, please ask the manufacturer to adjust it according to the assembly status.
front panel
fig 10
filter
4 screw
- 20 -
wind-path
front grill
Advertisement
