Advertisement
Available languages
Available languages
Introduction for buttons on remote control
Note:
● This is a general use remote control, it could be used for many air conditioners with multifunction; for
some function, which the model doesn't have, press the corresponding button on the remote control
so the unit will keep running.
● After putting through power, air conditioner will give out a sound and operation indicator
(red indicator). You can operate the air conditioner through the remote controller.
● At ON status, after each pressing button on remote controller, the signal icon "
will flash once. The air conditioner will make a sound
● Under ff status, set temperature and clock icon will be displayed on the display of remote controller
(If timer on, timer off and light functions are set, the corre-sponding icons will be displayed on the remote
control at the same time); Under on status, the display will show the corresponding set function icons.
1
ON/OFF button
Press this button, the unit will be turned on, press it once more, the unit will be turned
off. When turning on or turning off the unit, the Timer, Sleep function will be canceled,
but the presetting time is still remained.
2
MODE button
Press this button, Auto, Cool, Dry, Fan, Heat mode can be selected circularly. Auto mode
is default while power on. Under Auto mode, the temperature will not be displayed;
Under Heat mode, the initial value is 28°C (82°F); Under other modes, the initial value
is 25°C (77°F).
(Only for cooling and heating unit. As for cooling only unit, it won't have any action when it receives the signal of heating
operation.)
3
- button
Presetting temperature can be decreased. If you press this button, the temperature can be
set up, continuously press this button and hold for two seconds to change temperature
until you unhold this button and send a different order. The℃(℉) signal will be displayed
all the time. The temperature adjustment is unavailable under the Auto mode, but the order
can be sent by if you press this button.
4
+ button
For presetting temperature increasing. If you press this button to raise temperature, when
unit is on. Continuously press and hold this button for more than 2 seconds, the corresponding
contents will be changed rapidly, until unpress the button then send the information, ℃(℉) is
displlaying all along. In Auto mode, the temperature can not be set up, but operate this button
can send the signal. Centigrade setting range: 16-30; Fahrenheit scale setting range 61-86.
indicating the signal has been sent to air conditioner.
AUTO
COOL
- 6 -
DRY
FAN
HEAT
" " is ON
"
on remote controller
Advertisement
