Preparing The Remote Control; Operating With The Remote Control - LG L2320A User Manual

23 inches (58.4cm) flat panel active matrix-tft lcd
Hide thumbs Also See for L2320A:
Table of Contents

Advertisement

Using the Remote Control
Insert the batteries into the remote
control to operate the monitor.
Preparing the Remote
Control
1.
Open the battery cover.
2.
Insert batteries (AAA size).
Make sure to match the + and -
on the batteries to the marks
inside the battery compartment.
3.
Close the cover.
Note
Do not insert the batteries into the remote
control in the wrong direction.
Do not charge, heat, open, or short-circuit the
batteries. Also do not throw the batteries into
the fire.
Do not use different types of batteries together,
nor mix old and new batteries.
This section shows you how to use
the remote control.
Operating with the Remote
Control
Point the remote control at the remote
sensor and press the buttons.
Within about 23ft (about 7m)
Distance : About 23 ft (7 m) from the
front of the remote sensor.
Angle :
About 30° in each direction
of the front of the remote
sensor.
Do not expose the sensor of remote
control in the monitor to a strong light
source such as direct sunlight or
illumination. If so, may not be able to
operate the monitor with the remote
control.
Note
Do not drop the remote control or handle it
roughly.
Do not leave the remote control in extremely hot
or humid conditions.
Do not expose the remote control to water or
anything wet.
A7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Flat panel monitor

Table of Contents