Niigata seiki XTDB-SP2N Instruction Manual

STEREO TURRET MICROSCOPE
XTDB - SP 2 N
Thank you for purchasing the Stereo Turret Microscope.
Please read this manual thoroughly before use to insure proper operation
and long service.
■NOTES
● This is a precision instrument – Handle With Care. Use caution to avoid
shock or excessive forces on instrument when in use or transport.
● Avoid direct sunlight or areas with high temperatures or high levels of dust.
Keep in location where temperate and humidity are stable.
● Keep lens surface clean from dirt and fingerprints.
● Clean the lens gently with lens cleaning cloth or soft cotton cloth.
● When not in use, store with protective cover, in location that has low
moisture in order to prevent internal mold growth.
■SPECIFICATIONS
Magnification
Objective Lens
Eyepiece Lens
Working Distance
Eyepiece Angle
Focus Adjustment
Stand
Stage Plate
Eye Width Adj. Range
Diopter Adj. Range
Optional Ring Light ( sold separately )
Illumination
Light Mounting Section :
Ring Light Mounting
Microscope Mounting Threads : M48×P0.75
Base Dimensions
Weight
Accessories
INSTRUCTION MANUAL
10×・ 30×
1×・ 3× ( Turret style )
WF10× ( 20 mm Field of View )
100 mm
45°
Movable Body
Pole Type ( 32 mm )
95 mm Black/White Acrylic
55〜 75 mm
±5 Diopter
54 mm
L 255× W 200 × H25mm
Approx. 3.6 kg
Ring Light Mounting Attachment
Cover
■ PART IDENTIFICATION - ASSEMBLY
Head
Focus
Knob
Ring Light
Mounting
Attachment
Base
Ring Light Mounting Attachment
Mounting Threads
Light Mounting Groove
■OPERATION
1. Sample Placement
①Place sample in center of Stage.
②If required, use Stage Clips to hold sample in
place.
2. Eye Width Adjustment
Hold the left and right sleeve in each hand and
look through the eyepieces. Adjust the sleeves
to align the left and right field of view seen
through the eyepieces.
Securing the Head Position
①Hold the Left and Right Side Focus Knobs in
your Left and Right hands.
②While holding one Knob, rotate the other in
the direction of the arrow shown on the Knob
for increased "TENSION" to tighten.
Head position is now secure.
Eyecups
Eyepiece
32mm
Diopter
Adj. Ring
Head Locking
Knob
Turret
Objective Lens
Stage Plate
Stage Clips
200mm
3. Focus Adjustment・Diopter Adjustment
①Turn the Turret to select the desired Objective
magnification.
②Look through the right Eyepiece with the
right eye and observe the sample. Adjust the
focus using the Focus Knob.
③Look through the left eyepiece with the left
eye, and adjust focus using the Diopter
Adjustment Ring.
Niigata Seiki Co., Ltd.
5-3-14, Tsukanome, Sanjo, Niigata, Japan, 955-0055
Tel. : +81-256-33-5522 Fax. : +81-256-33-5518
MAIL intl.sales@niigataseiki.co.jp
URL
Sleeve
255mm
http://www.niigataseiki.co.jp