Download Print this page

Niigata seiki XZ-45N Instruction Manual

Zoom stereo microscope

Advertisement

Quick Links

ZOOM STEREO MICROSCOPE
Thank you for purchasing the Zoom Stereo Microscope.
Please read this instruction manual thoroughly before use to insure
proper operation and long service.
■NOTES
● This is a precision instrument – Handle With Care. Use caution to avoid
shock or excessive forces on instrument when in use or transport.
● Avoid direct sunlight or areas with high temperatures or high levels of
dust.
Keep in location where temperate and humidity are stable.
● Keep lens surface clean from dirt and fingerprints.
● Clean the lens gently with lens cleaning cloth or soft cotton cloth.
● Do not turn the left and right Zoom Controls in opposite directions; this
will damage the instrument.
● When not in use store with protective cover, in location that has low isture
in order to prevent internal mold growth.
■SPECIFICATIONS
Magnification
Objective Lens
Eyepiece Lens
Working Distance
Eyepiece Angle
Focus Adjustment
Stand
Stage Plate
Diopter Adj. Range
Optional Ring Light ( sold separately )
Illumination
Base Dimensions
Weight
Accessories
・ Eyecups ... 2 ・ Protective Cover ... 1
INSTRUCTION MANUAL
XZ-45N
10〜45×
1〜4.5× (Zoom Ratio 1 :4.5)
WF10× (20mm Field of View )
97mm
 60°
Movable Body
Pole Type
95mm Black/White Acrylic
±5Diopter
Mounting diameter: 53mm
L255×W200×H25mm
approx.3.6kg
■PART IDENTIFICATION and ASSEMBLY
Eyecups
Head
Zoom Control
Ring Light
Mount ( 53mm)
Base
■OPERATION
1. Sample Placement
① Place the sample in the center of the Stage
Plate.
② If required, use Stage Clips to hold sample in
place.
2. Eyecup Use
①Remove the rubber Guard from the Eyepieces.
②Install the Eyecups as shown.
※Make sure the
Guard Eyecup
Eyecups are
seated into the
groove on the
Eyepiece.
※When wearing
eyeglasses,
keep the
Guards in place
and do not install
the Eyecups.
Eyepiece
Diopter Adj. Ring
32mm
Sleeve
Head Locking Knob
Objective Lens
Focus Knob
200mm
3. Focus Adjustment ・ Diopter Adjustment
① Rotate the Zoom Control to set for highest
magnification.
② With right eye, look through the right eyepiece
and adjust the focus using the Focus Knob.
③ Rotate the Zoom Control for lowest
magnification.
④ Using the Right Diopter Adj.Ring, adjust the
focus if required.
⑤ Now rotate the Zoom Control back to highest
magnification and check the focus.
Repeat steps ② to ④ to achieve the best
focus accuracy.
⑥ Look through the left Eyepiece with the left
eye and adjust focus using the Left Diopter
Eyepiece
Adj.Ring similar to steps ① to ⑤ .
Groove
Niigata seiki Co., Ltd.
5-3-14, Tsukanome, Sanjo, Niigata, Japan, 955-0055
Tel. : +81-256-33-5522 Fax. : +81-256-33-5518
MAIL intl.sales@niigataseiki.co.jp
URL
Stage Plate
Stage Clips
255mm
http://www.niigataseiki.co.jp

Advertisement

loading

Summary of Contents for Niigata seiki XZ-45N

  • Page 1 Mounting diameter: 53mm Groove eyeglasses, L255×W200×H25mm Base Dimensions keep the Guards in place Niigata seiki Co., Ltd. Weight approx.3.6kg and do not install Accessories 5-3-14, Tsukanome, Sanjo, Niigata, Japan, 955-0055 ・ Eyecups … 2 ・ Protective Cover … 1 the Eyecups.
  • Page 2 ■各部の名称と組み立て方 接眼レンズ STEREO MICROSCOPE 視度調整環 実体顕微鏡 ズーム式 XZ - 45N アイシェード ズームハンドル この度は、実体顕微鏡 ズーム式 XZ-45N をお買い上げ頂きまして、誠に 鏡体 ありがとうございます。 32mm ご使用に際し、本取扱説明書を最後までお読みいただき、正しい使い方 スリーブ で末長く御愛用くださいますようお願い申し上げます。 本体固定ノブ ■ご使用にあたって ● 本器は精密機器ですので、操作中や持ち運びのときに、本体への衝撃や 過大な圧力を加えないように、取り扱いには十分注意をしてください。 対物レンズ リング照明装置 焦点合わせ ● 振動の多い場所、直射日光のあたる場所やほこりの多い場所、高温にな ステージプレート 取付部 ( 53mm) ハンドル る場所は避け、温度変化および湿気の少ないところを選んでください。 クレンメル ● レンズ面に汚れ、指紋などをつけないようご注意ください。...