ZOOM STEREO MICROSCOPE
XTS - SP 2
Thank you for purchasing the Zoom Stereo Microscope.
Please read this instruction manual thoroughly before use to insure proper
operation and long service.
■NOTES
● This is a precision instrument – Handle With Care. Use caution to
avoid shock or excessive forces on instrument when in use or trans-
port.
● Avoid direct sunlight or areas with high temperatures or high levels of
dust. Keep in location where temperate and humidity are stable.
● Keep lens surface clean from dirt and fingerprints.
● Clean the lens gently with lens cleaning cloth or soft cotton cloth.
● Do not turn left and right Zoom Controls in opposite directions –
doing so will result in damage to instrument.
● When not in use, store with protective cover, in location that has low
moisture in order to prevent internal mold growth.
■SPECIFICATIONS
Magnification
Objective Lens
Eyepiece Lens
Working Distance
Eyepiece Angle
Focus Adjustment
Stand
Stage Plate
Eye Width Adj. Range
Diopter Adj. Range
Optional Ring Light ( sold separately )
Illumination
Ring Light Attachment
Dimensions
Microscope Mounting Threads : M48×P0.75
Base Dimensions
Weight
INSTRUCTION MANUAL
6.5 〜 45×・13 〜 90×
0.65〜 4.5× ( Zoom Ratio 1:7 )
WF10× ( 20 mm Field of View )
WF20× ( 10 mm Field of View )
95 mm
45°
Movable Body
Pole Type
φ95 Black/White Acrylic
55 〜 75 mm
±5 Diopter
Light Mounting Section :φ51mm
L245 × W170 ×H 40 mm
Approx. 5.4 kg
■ PART IDENTIFICATION - ASSEMBLY
Ring Light
Attachment
Attachment
Mounting Threads
Light Mounting Groove
■OPERATION
1. Sample Placement
①Place sample in center of Stage.
②If required, use Stage Clips to hold
sample in place.
2. Eyecup Use
● For use without eyeglasses:
Hold Diopter Adjustment Ring and
rotate Eyepiece to adjust diopter setting.
Align the Eyecups to point toward user
and look through the Eyepiece with
eyes brought close.
● For use with eyeglasses:
Remove Eyecups to use.
3. Eye Width Adjustment
Hold the left and right sleeve in each hand
and look through the Eyepieces. Adjust the
Sleeves to align the left and right field of
view seen through the Eyepieces.
Eyecups
Eyepiece
φ25mm
Diopter
Adj. Ring
Focus Knob
Zoom
Control
Head
Locking Knob
Head
Stage
Up/Down
Plate
Locking Knob
Base
170mm
4. Focus Adjustment・Diopter Adjustment
①Rotate the Zoom Control for highest magnification.
②Look through the right eyepiece with the right
eye and adjust the focus using the Focus Knob.
③Rotate the Zoom Knob for lowest magnification.
④Using the Right Diopter adjustment, adjust the
focus if required.
⑤Now rotate the Zoom Control back to highest
magnification and check the focus. Repeat
steps 2 to 4 to achieve the highest focus
accuracy.
⑥Rotate the Zoom Control for highest
magnification. Look through the left Eyepiece
with the left eye, and adjust focus using the Left
Diopter Adjustment Ring.
Niigata seiki Co., Ltd.
5-3-14, Tsukanome, Sanjo, Niigata, Japan, 955-0055
Tel. : +81-256-33-5522 Fax. : +81-256-33-5518
MAIL intl.sales@niigataseiki.co.jp
URL
Sleeve
Stage Clips
245mm
http://www.niigataseiki.co.jp