Set Juggler Static Ip And Subnet - 7th Sense Juggler 1 User Manual

Front Panel: Controls

Set Juggler Static IP and Subnet

This can be done from the Juggler front panel touch screen.
Touch to select 'Info' tab if it is not already showing.
·
Swipe from right to left to move to the IP Editor page:
·
Touch to select an octet (address element) to change; it will show highlighted blue.
·
Use the number pad on the left to enter a value up to 255.
·
On the number pad:
. (separator) moves to the next octet
o
C (clear) sets the selected octet value to 0
o
Touch 'Reset' to undo all changes, or
·
Touch 'Apply' and then Confirm the changes:
·
M611-1 Operating Juggler 1 Pixel Processor : User Guide
14
© 2022 7thSense