HTC Hurricane Series Service Manual page 63

Chapter 13- Board Level Repair
If you are authorized by HTC to perform board level repair , you could ask below material/parts from
HTC .
13.1 P roblem Identification & Troubleshooting
(1) Basic Repair Instructions for Component Replacement：
Step 1. Place the solder-proof tape to cover the surrounding area of the components which being replaced.
：
Warning DO NOT overheat the tape and components to a
damage.
Step 2. Use Heater Gun (HAKO850B, set the temperature between 350℃, Air Speed 3~5) to remove the
compone
Step 3. It has to wait the temperature cool down before the damaged components been removed. Or, the
others compon
Step 4. After the damaged component has been replaced, clear the surroundings for solder and flux
residues.
HTC confidential
© 2004, HTC Corporation. All rights reserved.
nts.
ents could be gone when the solder-proof tape been taken off.
void the tape melted and make the component
TOTAL 69 CONT.ON. 64 PAGE NO. 63