Advertisement
Step 1: Determine centerline location
Use a level to draw a vertical centerline.
Draw the line from the top of the vent hood
to the ceiling.
Mark the location of any studs located within 6"
of the centerline.
The vent hood should be installed in the desired
final location before proceeding to the next step.
Step 2: Locate the mounting plate
Place the mounting plate against the wall.
Align the tips of the arrows on top and bottom
of the mounting plate with the centerline.
Confirm that the built-in 1/4" spacer on the bottom of the
mounting plate is at or above the top of the vent hood. Push
up the mounting plate against the ceiling.
R2
Installation Instructions
1/4" spacer
FirstBuild.com
Ceiling
Stud
Ceiling
5
Advertisement
