See Warranty section for more information. Due to the weight and size of these vent hood covers and to reduce the risk of personal injury or damage to the product, TWO PEOPLE ARE REQUIRED FOR INSTALLATION OF THIS PRODUCT. FirstBuild.com...
If studs are not available near the installation location, use appropriate drywall anchors (not included) to ensure that the mounting plate is properly fastened into the wall. Unboxing Make sure to wear safety glasses and safety gloves before unboxing or using tools. Remove strapping Remove top cap Remove sleeve Lift product FirstBuild.com...
Confirm that the built-in 1/4” spacer on the bottom of the mounting plate is at or above the top of the vent hood. Push up the mounting plate against the ceiling. 1/4” spacer FirstBuild.com...
Use an approved stainless steel polish or cleaner or warm, soapy water to wipe down your duct cover. Do not use abrasive pads, chemicals, or other cleaning methods that can damage the finish. Always wipe in the direction of the grain. FirstBuild.com...
For the period of 1 year from the date of the original purchase: If the duct cover fails due to a defect in materials or work- manship, during the limited one-year warranty, FirstBuild will either repair your product, replace your product with a new or remanufactured product, or refund the purchase price of the product at FirstBuild’s sole discretion.