Ti48 Instruction Manual v1.2
QUICK START
BACK PANEL OF TI48
DO NOT OBSTRUCT FAN
DO NOT OBSTRUCT FAN
ON
ON
AC INLET
AC INLET
CE
CE
1. MAINS POWER
1.1
Connect the supplied mains power cable to the IEC socket on the back panel
of the Ti48 labelled "AC INLET".
1.2
Connect the wall plug of the mains cable to the wall mains socket.
1.3
Turn on the wall mains socket.
SAFETY NOTE : the mains power to the Ti48 is always on when the wall socket is
on (even when the Ti48 is in a nonoperational state eg. when the display screen is
off).
In order to remove mains power from the Ti48, you must turn off the mains power at
the wall socket.
2. AUDIO CONNECTIONS
2.1
The Ti48 is a digital audio storage system and CD transport; the output from
its external connectors (I
output an analogue (music) signal. In order to output a music signal, you must
connect the Ti48 to an external digitaltoanalogue converter (DAC) to convert
the digital audio into an analogue signal. The analogue outputs of the DAC
should then be connected to the inputs of a preamplifier or integrated
amplifier.
2.2
If you are using a Zero One DAC eg. Ar38, connect the Ti48 to the DAC
using the supplied I
connected to the Ti48 at the 25pin connector marked "I
pin (small) end to the Zero One DAC at the connector marked "DIGITAL IN"
SPDIF
SPDIF
IN
IN
OUT
OUT
MIC IN OUT
MIC IN OUT
IMAGI LTD
IMAGI LTD
Made in Singapore
Made in Singapore
CLASS 1
CLASS 1
!
!
LASER PRODUCT
LASER PRODUCT
RISK OF ELECTRIC SHOCK
RISK OF ELECTRIC SHOCK
2
S or SPDIF) are purely digital signals. It does not
2
S cable. The 25pin (large) end of the I
2
2
LINE
LINE
I
I
S
S
OUT
OUT
CAUTION
CAUTION
DO NOT OPEN –
DO NOT OPEN –
2
S cable is
2
S OUT" and the 15
5
Ti48
Ti48
ARCHIVAL
ARCHIVAL
CD TRANSPORT
CD TRANSPORT
IMAGI LTD
IMAGI LTD
Made in Singapore
Made in Singapore