Ti48 Instruction Manual v1.2
9. CD Player Mode
9.1
On startup, the Ti48 enters the CD Player mode by default. To change to CD
Player mode from another mode eg. from HD Player : press MENU / OK
In CD Player mode, you can select the following Options :
Option
Grab Album
Grab Trk(s) to HD
Grab Trks >Plylst
Output Settings
To access the Options
Use the Up and Down arrow
keys to move the selection
cursor up and down
9.2
Grab Album : refer to section 6.2 in the Quick Start manual.
9.3
Grab Trk(s) to HD : press OPTS /
9.3.1 If the CD has been recognised by the EmDB database, the screen will show :
Function
Archive a CD
Archive selected tracks from a CD
Store selected tracks in the buffer to make a compilation
album (tracks are not permanently archived until the playlist is
saved)
Change the upsampling rate, digital filter, dither, wordlength,
phase, signal; attenuation and digital output type
Remote Control
Key(s)
OPTS
Grab Trk(s) to HD
Grab Trk(s) to HD
>T01 : "Track name" 0
>T01 : "Track name" 0
Front Panel Screen
CD Player
CD Player
> Grab Album
> Grab Album
Grab Trk(s) to HD
Grab Trk(s) to HD
Grab Trks>Plylst
Grab Trks>Plylst
CD Player
CD Player
Output Settings
Output Settings
Display Settings
Display Settings
> Back
> Back
" > Grab trk(s) to HD" / OK
20