Numark NS7 Service Manual page 5

(A) REMOVE THE 3 PCS OF VR KNOB.
(B) REMOVE THE 19 PCS OF SCREW.
(C) REMOVE THE 3 PCS OF BRASS STANDOFF.
(D) REMOVE THE 4 PCS CONNECTOR BEFORE REMOVAL OF FUNTION PCB(L).
(E) REMOVE THE 12 PCS OF KNOB AMD 7 PCS NUT.
(F) REMOVE THE 5 PCS OF SCREW.
(G) REMOVE THE 4 PCS OF BRASS STANDOFF
(H) REMOVE THE 4 PCS CONNECTOR BEFORE REMOVAL OF MIXER PCB.
( I ) REMOVE THE 3 PCS OF VR KNOB.
(J ) REMOVE THE 4 PCS OF BRASS STANDOFF.
(K) REMOVE THE 3 PCS OF BRASS STANDOFF.
(L) REMOVE THE 19 PCS OF SCREW.
(M) REMOVE THE 4 PCS CONNECTOR BEFORE REMOVAL OF FUNTION PCB(R).