PROFECO 77415 Instruction Manual page 21

Information on noise/vibration
Measured noise values determined in accordance with EN 62841.
Wear ear protection!
Total vibration values (triax vector sum) determined according to EN 62841:
The vibration emission level given in this information sheet has been measured
according to a standardised test given in EN 62841 and can be used to compare one
tool with another.
It may be used for a preliminary assessment of exposure.
The vibration emission level indicated represents the main applications of the tool.
However, if the tool is used for different applications, with different accessories or is
poorly maintained, the vibration emission may differ. This may significantly increase
the exposure level over the total working period.
When estimating the level of exposure to vibration, the times when the tool is
switched off or when the tool is operating but not actually carrying out the work must
also be taken into account. This can significantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect the operator from the effects of
vibration, such as: maintaining the tool and accessories, keeping hands warm,
organising work patterns.
Suggestions to reduce the risk of vibrations:
1) Wear a glove during use
2) Reduce the operating time and shorten the trigger time.
Operating
Before use
Remove all packing material and loose parts from the unit.
Check the accessories before use. They must be suitable for the machine and for
your purpose.
If the machine is new, the battery must be charged first.
Attention!
After long-term storage, the battery capacity will decrease.
The battery is inserted in the handle, press the release button and remove the battery
from the handle.
A significant decrease in operating time per charge indicates that the battery is worn
out and needs to be replaced.
21