Advertisement
Quick Links
6"×10" BELT DISC SANDER
WITH MOVEABLE STAND
IMPORTANT:
For your own safety, read and follow all of the Safety
Guidelines and Operating Instructions before operating
this product.
GET IT DONE WITH BUCKTOOL
Contact Us:
email: service@bucktool.com
https://www.bucktool.com
909-255-1088 (8AM-5PM PST)
INSTRUCTION
MANUAL
Advertisement
Related Manuals for Bucktool BD61000
Summary of Contents for Bucktool BD61000
- Page 1 GET IT DONE WITH BUCKTOOL 6"×10" BELT DISC SANDER WITH MOVEABLE STAND Contact Us: email: service@bucktool.com https://www.bucktool.com 909-255-1088 (8AM-5PM PST) IMPORTANT: INSTRUCTION For your own safety, read and follow all of the Safety MANUAL Guidelines and Operating Instructions before operating...
- Page 2 Through a combination of years of hard work and experience we’ve been able to bring you the BUCKTOOL brand you see today. We live for challenges and strive to make our customers 100% satisfied. What BUCKTOOL does for customers is special, and we want to share this with you.
-
Page 3: Table Of Contents
BD61000 TABLE OF CONTENTS Specifications Safety guidelines Package contents Key parts diagram Operating instructions Maintenance Troubleshooting Exploded view Parts list Stand Warranty SPECIFICATIONS Motor 120VAC, 60Hz , 1.5HP Speed (no load) 3450RPM Belt size 6" x 48" Belt speed 1836 FPM Disc size 10"... -
Page 4: Safety Guidelines
BD61000 SAFETY GUIDELINES - DEFINITIONS • Always wear safety goggles or safety glasses with side shields. • Always wear respiratory and hearing protection. • To reduce the risk of injury, user and all bystanders must read and understand instruction manual before using this product. - Page 5 BD61000 POWER TOOL SAFETY 1. READ and become familiar with the entire Instruction Manual. LEARN the tool’s application, limitations and possible hazards. 2. KEEP GUARDS IN PLACE and in working order. 3. REMOVE ADJUSTING KEYS AND WRENCHES. Form the habit of checking to see that keys and adjusting wrenches are removed from the tool before turning ON.
- Page 6 BD61000 17. USE RECOMMENDED ACCESSORIES. Consult this Instruction Manual for recommended accessories. The use of improper accessories may cause risk of injury to yourself or others. 18. NEVER STAND ON THE TOOL. Serious injury could occur if the tool is tipped or if the cutting tool is unintentionally contacted.
- Page 7 BD61000 POWER TOOL SAFETY 1. USE sander on horizontal surfaces only. Operating the sander when mounted on non-horizontal surfaces might result in motor damage. 2. TO STOP it from tipping over or moving when in use, the sander must be securely fastened to a bench top or supporting surface.
- Page 8 BD61000 IMPORTANT INFORMATION-Electrical A separate electrical circuit should be used for your machines. This circuit should not be less than #12 wire and should be protected with a 20-A time-lag fuse. If an extension cord is used, use only 3-wire extension cords which have 3-pronged grounding type plugs and matching receptacle which will accept the machine’s plug.
- Page 9 BD61000 The plug must be plugged into a matching outlet that is properly installed and grounded in accordance with all local codes and ordinances. Do not modify the plug provided–if it will not fit the outlet, have the proper outlet installed by a qualified electrician.
-
Page 10: Package Contents
BD61000 Package contents No. Description Qty. No. Description Qty. Foot bolt for sander Belt / disc sander (not shown) Wrench S=3, S=4, S=6 Miter gauge assy Inner hex screw M8x55 Belt fence - samll Hex nut M8 Belt fence - large... - Page 11 BD61000 No. Description Sanding Belt Sanding Belt Tension Release Sanding Belt Fence Sanding Disc Miter Gauge Sanding Disc Table Work Table Handle Support Foot Sanding Belt Frame Support ON/OFF Safety Switch Carry Handle Sanding Belt Tracking Knob...
- Page 12 BD61000 WARNING! To avoid injury, always keep the plug disconnected from the power source and the switch turned OFF until the sander is completely assembled and adjusted properly. INSTALLING THE SUPPORT FOOT 1. Tilt the sander up and insert the foot bolt (1) to the mounting hole (2).
- Page 13 BD61000 INSTALLING THE SANDING DISC TABLE 1. Align the curved slots in the table support with the two threaded holes in each end of the Frame. 2. On each support, position the curved metal Guide Pieces (1) in the support slots.
- Page 14 BD61000 INSTALLING DUST COLLECTION The use of a dust collection system with the sander is strongly recommended. It will maintain shop cleanliness, and help prevent possible health hazards caused by wood dust. The sander has one dust port. Slide the hose of your dust collector over the outlet, and secure with a hose clamp.
- Page 15 BD61000 BELT HORIZONTAL SANDING When using the sanding belt in the horizontal position, to perform surface or edge sanding, the belt fence (1) must always be used. Always hold the workpiece (2) firmly keeping your fingers away from the sanding belt (3).
- Page 16 BD61000 WARNING! For your safety, turn switch OFF and remove the power cord from the electrical outlet before adjusting or performing maintenance on your sander. REPLACING SANDING DISC A sanding disc is pre-mounted at the factory. Use only sanding discs that measures 10 in.
- Page 17 BD61000 REPLACING THE V-BELT Should the rotation of the sanding belt or disc STOP, the reason may be that the V-belt is broken or has stretched out so much, that any tension adjustments do not work. In these cases, the V-belt must be replaced.
- Page 18 BD61000 7. Carefully tip the sander to one side to avoid any damage to the machine. Unscrew the four retaining Screws (15) and remove the base cover (16). 8. Remove the old V-belt from the two drive pulleys, and install a new V-Belt.
- Page 19 BD61000 WARNING! To avoid injury from an accidental start, turn the switch OFF and always remove the plug from the power source before making any adjustments. PROBLEM PROBLEM CAUSE SUGGESTED CORRECTIVE ACTION Motor will not 1. Defective or broken ON/OFF 1.
- Page 20 BD61000...
- Page 21 BD61000 ITEM DESC. SPEC. Star-head Screw + Spring + Flat Washer M4x6 M4x8 Star-head Screw + Spring + Flat Washer Base Plate Star-head Screw M5x8 Left Angle Scale Power Cord Dust Collection Port Belt A580 Hex Head Screw M6X8 Strain Relief...
- Page 22 BD61000 ITEM DESC. SPEC. Belt Cover Work Table For Disc Dust Collection Port Star-head Screw + Flat Washer M5X25 Star-head Screw + Spring + Flat Washer M5X12 Driven Pulley Baffle Plate Belt Frame Assembly Base Bearing Cap Ball Bearing 6202...
- Page 23 BD61000 ITEM DESC. SPEC. Driven Drum Miter Gauge Knob Miter Gauge Label Miter Gauge Hex Head Screw M6X16 Lock Washer Miter Gauge Bar Miter Gauge Pointer Worktable Handle M8X17 Wrench Curved Guide Piece Right Angle Scale Wrench Hex Head Bolt...
- Page 24 BD61000 STAND ASSEMBLY 1. Connect leg (1) with the long bar (2) with two nuts (3) and bolts (4). 2. Connect another leg (5) to the other end of the long bar (2) in step 1. 3. Repeat steps 1-2 to assemble a second side of the stand.
- Page 25 BD61000 7. Place the stand on the floor normally and assemble the caster (9) to the stand. 8. Assemble the push handle (10) on the other side of the stand. 9. Screws, washers and nuts are supplied to finally mount the sander onto the stand for use.
-
Page 26: Exploded View
BD61000 STAND EXPLODED VIEW... -
Page 27: Stand
BD61000 STAND PARTS LIST ITEM DESC. SPEC. Long Bar 303mm Short Bar 357mm Small Round Head Bolt M6x12 Hex Flange Nut Rubber Foot Inner Hex Screw Flat Washer Hex Nut Hex Bolt M6x12 Push Handle Caster Support Caster Axle Ring... -
Page 28: Warranty
GET IT DONE WITH BUCKTOOL TWO-YEAR LIMITED WARRANTY Having Problems ? Give us a chance to help you before returning this product Email : service@bucktool.com https://www.bucktool.com 909-255-1088 (8AM-5PM PST) https://www.bucktool.com...
Need help?
Do you have a question about the BD61000 and is the answer not in the manual?
Questions and answers