Master Reset - Clickfree C2N User Manual

Clickfree C2N Home Backup Drive User Guide
Warning: While a software update is taking place it is very important for you not to
remove the
turn off or restart the computer until the update is complete.
3. When the software update is complete, you must unplug the
Backup Drive and plug it in again for the update to take effect.
M R
ASTER ESET

Master Reset

is used to remove all backed-up content from all computers that have been
backed up on your C2N Home Backup Drive, and to apply factory settings – see "What
are 'factory settings' and how do I use them?" on page 61.
After you perform a
content. However, your C2N Home Backup Drive can still be used for new backups.
Clickfree
Note:
If you want to remove only the content that was backed up from one computer, see "To
remove a computer" on page 61.
♦ To remove all backed up content:
1. On the
Tools
2. If you really want to remove all backed-up content from Clickfree, check the
checkbox and click
Copyright © 2010 Storage Appliance Corporation.
Clickfree C2N Home Backup Drive from your computer and not to
Master Reset you can no longer restore any previously backed-up
never erases anything other than the backups it has performed.
screen click
Master Reset
.
Reset
.
Advanced Topics (HD)
Clickfree C2N Home
68