ENGLISH Introduction ..................................Care and maintenance ..............................General features ................................Product content ................................Top panel ..................................Rear panel ..................................Switching on and off the device. Stand-by mode...................... Bluetooth pairing ................................Playback control ................................RCA audio-in (AUX) ................................. 3.5 mm audio-in (AUX) ..............................
Do not use neither corrosive nor abrasive cleaning products. Keep the device clean and free of dust using a soft and dry cloth. Please do not dismantle the device. All repairs should be done exclusively by qualified staff of Energy Sistem Technology, S.A.
Page 5
1. LED indicator 2. Next 3. Back 4. Play - Pause 5. Change mode 6. Volume + 7. Volume - 8. RCA audio-in (AUX) energysistem.com...
Switching on and off the device. Stand-by mode. Once the Tower 1 has been plugged into a socket, turn it on by moving the power switch on the back side of the tower to the "ON" position. At that moment, you can switch it on and off by keeping the Play - Pause (4) button on the top panel pressed for 2 seconds.
Instead, you must do it through the audio device (external player) connected. 3.5 mm audio-in (AUX) Your Tower 1 features an 3.5 mm audio-in (AUX) (9) which allows you to connect your music player using a 3.5 mm jack audio cable.
Important: This warranty does not cover any damage or loss of data stored in warranty products. Therefore, Technical Service of Energy Sistem Technology, S.A. will not assume any loss of the above mentioned information. In this respect it is recommended that you make a backup of your data and remove any personal data from the product's internal memory before you send it or send the device with the original data only.
Page 9
Daniel Havillio Product Management Director energysistem.com...
Need help?
Do you have a question about the Tower 1 and is the answer not in the manual?
Questions and answers