Using The Eyebrow Trimmer - Silvercrest SPS 1.5 A1 Operating Instructions Manual

Using the eyebrow trimmer

To trim your eyebrows or remove facial hair, proceed as follows:
1) Attach the eyebrow trimmer 3 to the handset 4 as described in
the section "Removing and connecting the attachments".
2) To trim the hair to a length of 3 mm or 6 mm, additionally attach
the eyebrow trimmer comb 2 to the eyebrow trimmer 3:
(Fig.4)
Lock the eyebrow trimmer comb 2 into the guide rail on the eyebrow
trimmer 3 (see Fig. 4). Ensure that the desired length of the
eyebrow trimmer comb 2 is adjacent to the side of the eyebrow
trimmer 3 which has the longer blade.
The short edges of the eyebrow trimmer comb 2 allow you to trim
your eyebrows to 3 mm and the long edges of the eyebrow trimmer
comb 2 allow you to trim your eyebrows to 6 mm evenly; to do this,
apply the eyebrow trimmer comb 2 vertically to your skin (Fig. 5).
SPS 1.5 A1
GB │ IE │ NI │
15 ■