Ferroli CONNECT Installation And Use Manual page 34

No. Parameter
1) Clock
2) Temperature
3) COUP code
4) DHW temperature
5) Boiler information
6) Installer data
7) Exit
1) Clock
» Press the buttons
enter.
» Press the "set"
hour,
» Press the "set"
» Press the buttons
» Press "mode"
2) Temperature
» Press the buttons
to enter.
» Press the buttons
» comfort (
» Press the buttons
» Press "set"
34
EN
Display
and
button to select the data to be changed with this sequence:
minutes,
button to enable
and to change the value.
to go back.
and to select the temperature menu, and then "set"
and to select the temperatures to be changed:
) – economic (
and to change the value of the selected temperature.
or "mode"
cod. 3541S180 - Rev. 00 - 03/2019
description
Set hours, minutes, year (y), month (m), day (d).
Set comfort temperature (CFT) / economy tempera-
ture (ECO) / frost protection (FRT)
RF code (see par. 5.3)
Set DHW temperature, function available only with
OpenTherm connection
Reading of some boiler parameters only with Open-
Therm connection
Set the pswd "10"
Return to the home page
to select the clock menu, and then "set"
year, month,
or disable
) – frost protection (
to return to the previous menu.
day.
daylight saving time.
)
to