The "Connect" Application; Creating The Account; Rf Configuration; Wi-Fi Configuration - Ferroli CONNECT Installation And Use Manual

5.2 The "CONNECT" application

To allow proper operation with your device (Tablet or smartphone), proceed as follows:
• Download the App (CONNECT) directly from the App Store of your device.
• After installation, create the account.
5.2.1

Creating the account

• Make sure your device is connected to the Wi-Fi network.
• Open the dedicated APP, and click on "Register".
• Enter the required data.
• To confirm the registration, click on the link received via Email. After confirmation,
enter Login and Password.

5.3 rF configuration

To establish the RF connection between the thermostat and the receiver, proceed as
follows:
• Press the receiver's LED button until it flashes.
• In the thermostat, keep the "set"
• Scroll down to
• When the message "r0X" appears, the connection has been made. Press the "set"
button.

5.4 WI-FI configuration

With your device connect to the local WiFi network; after the correct configuration you
can switch to the data network.
• Click the three dots at the top right and follow the instructions for the connection.
• In the WiFi box, press the WPS button (approx. 1 sec).
• Follow the App instructions.
button pressed and access the settings menu.
and press the "set"
cod. 3541S180 - Rev. 00 - 03/2019
button.
27
EN