Connect App Configuration; Local Weather; Outside Temperature; Add Devices - Ferroli CONNECT Installation And Use Manual

5.5 CONNECT aPP configuration

5.5.1

local weather

Click on the top right of the APP to access the "Thermostat Information" menu
Enter the information to get the local weather (name of city) for details about the outside
temperature.
5.5.2

Outside temperature

If the outdoor temperature information is available (via WEB or OpenTherm) the tempera-
ture set in the boiler takes this value into account to adjust the flow.
If the outdoor temperature is not available, the flow is adjusted according to the set room
temperature.
5.5.3

add devices

Before proceeding, make sure each thermostat is connected to the receiver via RF.
Click "add device" on the information menu and enter the required data.

5.6 setting temperatures

From the main page, access "my room" to
set the desired room temperature in manu-
al mode or for time programming.
Manual mode: set the temperature by turning the cursor on the display.
cod. 3541S180 - Rev. 00 - 03/2019
fig. 9
EN
29