General Information; Disassembly - Pioneer KEH-P490 Service Manual

KEH-P490,P4900,P4950

7. GENERAL INFORMATION

7.1 DISASSEMBLY

-
Remove the Case(not shown)
1. Remove the two screws.
2. Remove the Case.
-
Remove the Cassette Mechanism Module
(not shown)
1. Remove the four screws.
2.Disconnect the connector, and then remove the
Cassette Mechanism Module.
- Remove the Panel Unit(Fig.1)
Disengage the stopper at two locations indi-
cated by arrow.
Remove the Panel Unit.
-
Remove the Tuner Amp Unit(Fig.2)
Remove the two screws.
Remove the four screws.
Remove the screw.
Unbend the tabs at four locations indicated
by arrow until straight.
Remove the Tuner Amp Unit.
42
Panel Unit
Tuner Amp Unit
Cassette Mechanism Module
Fig.1
Fig.2