Compressor Disassembly Order - mycom SCV Series Instruction Manual

Alternatively, place wooden blocks high enough to provide the flange with clearance from the
workbench surface below the legs of the suction cover and bearing head and lower the
compressor on the wooden blocks as shown in below picture to the right.
5.3.6

Compressor Disassembly Order

The disassembly order of the SCV-series compressor is general as described below.
Generally SCV-series compressors are disassembled in the order described below. But this order is
just an example and the actual order may differ according to individual situations.
Depending on the situation, please complete the work in a safe and appropriate procedure.
a) Unloader indicator block
(n some cases, the unloader indicator assembly may be removed without removing the wiring.)
b) Mechanical seal block
c) Unloader cover block
d) Unloader cylinder and Balance piston cover
e) Balance piston block
f) Bearing cover
g) Suction cover and Side bearings
h) Thrust bearing block
i) Rotor and Main rotor casing
j) Variable Vi auxiliary slide valve
k) Bearing head and Main bearing
SCV-series Screw Compressor
Chapter 5 Maintenance and Inspection
5.3 Compressor Disassembly Preparation
5-13
2205Q2JE-HO-S6-N_2020.01.