Using The Appliance - Beko HNU61422B User Manual

3

Using the Appliance

3.1 Use of the Control Panel
1 2
The hood is equipped with a mechanical control.
• Pressing the "0" - disables the hood.
• Pressing the "1" - to turn the hood with a minimum speed.
• Pressing the "2" - turns the hood with an average speed.
• Pressing the "3" - turns the hood at maximum speed.
Higher speed means more air flow.
• Press the button - to turn on the lights. Repeat pressing
the button to turn off the lighting.
3.2 Things to Do for Energy Saving
• Ensure sufficient air intake to make the hood operate effi-
ciently and with low operation noise during cooking.
• Set the fan level according to the density of steam in kitchen.
Use the high level only when needed. A lower fan level
means less energy consumption.
• If dense smoke is expected in the kitchen, select a higher
level of fan in advance. It is required to operate the hood
much longer to remove the smoke already spread all over
kitchen.
• Turn off the hood when not in use.
• Clean or replace the filter at intervals stated, thus, the
efficiency of the ventilation is increased and the risk of fire
is eliminated.
3.3 Operating the Hood
• Hood is equipped with a motor having various speed
settings.
• For a better performance, we advise you to use low speeds
in normal conditions, and high speeds when smell and
vapors are intensified.
• You can start the hood by pressing the desired speed level
key.(1,2,3 )
8 / EN
3 0
• You can illuminate the cooking area by pressing the light
key.( )
3.4 Lamp Replacement
Max: 3 W
GU10
Fig. 3
Symbol
Bulb installation
Disconnect the hood from the mains supply. This appliance is
Bulb dismantling
Symbol
equipped with 3 W spot LED lamps.
A
Before replacing the light bulbs, disconnect
the power supply of the hood.
A
Do not touch the light bulbs when they are
hot.
A
Be careful not to touch the replaced light bulb
directly with hands.
C
You may procure lamps from Authorised
Service Agents.
Cooker Hood / Instructions Booklet
2
1
1
2