AEG FSS52610Z User Manual page 10

10 www.aeg.com
• The indicator
• The display shows the current
setting.
–
–
3. Press
4. Press on/off to confirm the setting.
6.4 Acoustic signals
Acoustic signals sound when a
malfunction of the appliance occurs. It is
not possible to deactivate these acoustic
signals.
There is also an acoustic signal that
sounds when the programme is
completed. By default this acoustic
signal is deactivated but it is possible to
activate it.
How to activate the acoustic
signal for the end of
programme
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
the indicators
flash and the display is blank.
2. Press
• The indicators
off.
• The indicator
• The display shows the current
setting:
–
–
3. Press
4. Press on/off to confirm the setting.
6.5 AirDry
AirDry improves the drying results with
less energy consumption.
still flashes.
= rinse aid empty
notification activated.
= rinse aid empty
notification deactivated.
to change the setting.
and
, , and
.
, and
still flashes.
= Acoustic signal off.
= Acoustic signal on.
to change the setting.
During the drying phase, the
door opens automatically
and remains ajar.
CAUTION!
Do not try to close the
appliance door within 2
minutes after automatic
opening. This can cause
damage to the appliance.
AirDry is automatically activated with all
programmes excluding
To improve the drying performance refer
to the XtraDry option or activate AirDry.
CAUTION!
If children have access to the
until
appliance, it is advised to
deactivate AirDry as opening
the door may pose a danger.
How to deactivate AirDry
are
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
the indicators
start flashing and the display is blank.
2. Press
• The indicators
are off.
• The indicator
• The display shows the current
setting:
3. Press
= AirDry deactivated.
4. Press on/off to confirm the setting.
.
and
, , and
.
, and
still flashes.
= AirDry activated.
to change the setting:
until