Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for AEG FSS53907Z
Summary of Contents for AEG FSS53907Z
- Page 1 FSS53907Z User Manual Dishwasher USER MANUAL...
-
Page 2: Table Of Contents
13. ENVIRONMENTAL CONCERNS..............27 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. - Page 3 ENGLISH responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety This appliance can be used by children aged from 8 •...
-
Page 4: Safety Instructions
If the supply cord is damaged, it must be replaced by • the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard. WARNING: Knives and other utensils with sharp • points must be loaded in the basket with their points down or placed in a horizontal position. - Page 5 ENGLISH 2.4 Use cable. Should the mains cable need to be replaced, this must be carried out • Do not put flammable products or by our Authorised Service Centre. items that are wet with flammable • Connect the mains plug to the mains products in, near or on the appliance.
-
Page 6: Product Description
2.6 Disposal separately: These lamps are intended to withstand extreme physical conditions in household appliances, WARNING! such as temperature, vibration, Risk of injury or suffocation. humidity, or are intended to signal • Disconnect the appliance from the information about the operational mains supply. -
Page 7: Control Panel
ENGLISH • When the appliance has a When AirDry is activated malfunction, the red light flashes. during the drying phase, the Beam-on-Floor is off when projection on the floor may the appliance is deactivated. not be completely visible. To see if the cycle is finished, check the control panel. -
Page 8: Programme Selection
Indicator Description Machine Care indicator. It is on when the appliance needs internal clean‐ ing with the Machine Care programme. Refer to "Care and cleaning". Drying phase indicator. It is on when you select a programme with the dry‐... - Page 9 ENGLISH 5.4 Programmes overview Programme Dishwasher Degree of soil Programme phases EXTRAS load Quick Crockery, Fresh • Dishwashing 50 °C • ExtraPower cutlery • Intermediate rinse • GlassCare • Final rinse 45 °C • AirDry Crockery, Fresh, lightly • Dishwashing 60 °C •...
-
Page 10: Basic Settings
Water (l) Energy (kWh) Duration (min) 1) 2) Programme 11.5 0.873 1h 30min 11.5 0.991 2h 40min 10.9 1.073 10.5 0.848 AUTO Sense 10.9 1.073 Machine Care 0.655 1) The pressure and the temperature of the water, the variations of the mains supply, the options, the quantity of dishes and the degree of soil can change the values. - Page 11 ENGLISH You can change the basic settings in To enter setting mode, press and hold setting mode. simultaneously about 3 seconds. When the appliance is in setting mode, The lights related to the Previous, OK the bars of the ECOMETER represent and Next are on.
- Page 12 Water hardness German de‐ French de‐ mmol/l Clarke de‐ Water softener lev‐ grees (°dH) grees (°fH) grees 47 - 50 84 - 90 8.4 - 9.0 58 - 63 43 - 46 76 - 83 7.6 - 8.3 53 - 57...
- Page 13 ENGLISH in the same cycle or at the beginning of Acoustic signals sound also the next programme. This activity when a malfunction of the increases the total water consumption of appliance occurs. It is not a programme by additional 4 litres and possible to deactivate these the total energy consumption of a signals.
-
Page 14: Before First Use
6.6 Key tones The latest programme that was completed before the appliance The buttons on the control panel make a deactivation is saved. It is then selected click sound when you press them. You automatically after you activate the can deactivate this sound. -
Page 15: Daily Use
ENGLISH 7.2 How to fill the rinse aid CAUTION! dispenser Only use rinse aid designed specifically for dishwashers. 1. Press the release button (D) to open the lid (C). 2. Pour the rinse aid in the dispenser (A) until the liquid reaches the fill level 'max'. - Page 16 • The ECOMETER indicates the The appliance senses the type of load level of energy and water and adjusts a suitable wash cycle. consumption. During the cycle, the sensors operate • The display shows the several times and the initial program programme duration.
-
Page 17: Hints And Tips
ENGLISH door, the appliance continues from the • When the programme is completed. point of interruption. • After 5 minutes if a programme was not started. If the door is opened for more than 30 seconds 8.10 End of the programme during the drying phase, the running programme ends. - Page 18 • The arrangement of the items in the results and hard-water filming or baskets is correct. spotting on the items. Using too much • The programme is suitable to the type detergent with soft or softened water of load and the degree of soil.
-
Page 19: Care And Cleaning
ENGLISH 10. CARE AND CLEANING • Do not use abrasive products, WARNING! abrasive cleaning pads, sharp tools, Before any maintenance strong chemicals, scourer or solvents. other than running the • Wipe clean the door, including the programme Machine Care, rubber gasket, once a week. deactivate the appliance and •... - Page 20 5. Make sure that there are no residues of food or soil in or around the edge 1. Turn the filter (B) counterclockwise of the sump. and remove it. 6. Put back in place the flat filter (A). Make sure that it is correctly positioned under the 2 guides.
- Page 21 ENGLISH 10.6 Cleaning the lower spray 10.7 Cleaning the upper spray arm We recommend to clean the lower spray Do not remove the upper spray arm. If arm regularly to prevent soil from the openings in the spray arm are clogging the holes.
-
Page 22: Troubleshooting
(B) counterclockwise and 5. To install the spray arm (C) back, pull the spray arm downwards. insert the mounting element (B) in 4. Wash the spray arm under running the spray arm and fix it in the delivery water. - Page 23 ENGLISH Problem and alarm code Possible cause and solution The appliance does not fill • Make sure that the water tap is open. with water. • Make sure that the pressure of the water supply is not The display shows i10 or too low.
- Page 24 Problem and alarm code Possible cause and solution The displayed programme • Refer to the consumption values table in the chapter duration is different than the "Programme selection". duration in the consumption values table. The remaining time in the •...
- Page 25 ENGLISH The appliance returns to the programme selection. 11.2 The dishwashing and drying results are not satisfactory Problem Possible cause and solution Poor washing results. • Refer to "Daily use", "Hints and tips" and the basket loading leaflet. • Use more intensive washing programme. •...
-
Page 26: Technical Information
Problem Possible cause and solution There are residues of deter‐ • The detergent tablet was stuck in the dispenser and gent in the dispenser at the was not washed away by water. end of the programme. • Water cannot wash away the detergent from the dis‐... -
Page 27: Environmental Concerns
ENGLISH Capacity Place settings 1) Refer to the rating plate for other values. 2) If the hot water comes from alternative source of energy (e.g. solar panels), use the hot water supply to decrease energy consumption. 12.1 Link to the product together with the user manual and all other documents provided with this information sheet... - Page 28 www.aeg.com/shop...