AEG FSS52615Z User Manual
  1. Manuals
  2. Brands
  3. AEG Manuals
  4. Dishwasher
  5. FSS52615Z
  6. User manual

AEG FSS52615Z User Manual

Hide thumbs Also See for FSS52615Z:
Table of Contents

Advertisement

Quick Links

Download this manual
FSS52615Z
USER
MANUAL
EN
User Manual
Dishwasher

Advertisement

Table of Contents
loading

Related Manuals for AEG FSS52615Z

Summary of Contents for AEG FSS52615Z

  • Page 1 FSS52615Z User Manual Dishwasher USER MANUAL...

  • Page 2: Table Of Contents

    14. ADDITIONAL TECHNICAL INFORMATION............22 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler - features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
  • Page 3 ENGLISH manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety This appliance can be used by children aged from 8 •...

  • Page 4: Safety Instructions

    If the supply cord is damaged, it must be replaced by • the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard. Put the cutlery in the cutlery basket with the sharp •...
  • Page 5 ENGLISH • Do not pull the mains cable to mains socket. Contact the Authorised disconnect the appliance. Always pull Service Centre to replace the water the mains plug. inlet hose. • This appliance is fitted with a 13 A 2.4 Use mains plug.

  • Page 6: Product Description

    3. PRODUCT DESCRIPTION Upper spray arm Rinse aid dispenser Lower spray arm Detergent dispenser Filters Cutlery basket Rating plate Lower basket Salt container Upper basket Air vent 3.1 Beam-on-Floor The Beam-on-Floor is off when the appliance is The Beam-on-Floor is a light that is deactivated.

  • Page 7: Control Panel

    ENGLISH 4. CONTROL PANEL On/off button TimeSaver button Display XtraDry button Delay button RESET button Programme button (up) Indicators Programme button (down) 4.1 Indicators Indicator Description Rinse aid indicator. It is always off while the programme operates. Salt indicator. It is always off while the programme operates. 5.
  • Page 8 Programme Degree of soil Programme phases Options Type of load • Fresh soil • Wash 60 °C or 65 °C • XtraDry • Crockery and • Rinses cutlery • Normal or light • Wash 45 °C • XtraDry soil •...

  • Page 9: Settings

    ENGLISH 6. SETTINGS 6.1 Programme selection To enter user mode, press and hold mode and user mode simultaneously until the indicators flash and When the appliance is in programme the display is blank. selection mode it is possible to set a programme and to enter the user mode.
  • Page 10 German de- French degrees mmol / l Clarke de- Water softener lev- grees (°dH) (°fH) grees 19 - 22 33 - 39 3.3 - 3.9 23 - 27 15 - 18 26 - 32 2.6 - 3.2 18 - 22...

  • Page 11: Options

    ENGLISH signal is deactivated but it is possible to During the drying phase, the activate it. door opens automatically and remains ajar. How to activate the acoustic signal for the end of CAUTION! programme Do not try to close the appliance door within 2 Make sure the appliance is in user mode.

  • Page 12: Before First Use

    Activating XtraDry deactivates TimeSaver If an option is not applicable and vice versa. to a programme, the related indicator is off or it flashes How to activate XtraDry quickly for a few seconds and then goes out. Press The related indicator is on.
  • Page 13 ENGLISH 8.2 How to fill the rinse aid 3. Fill the salt container with 1 kg of salt (until it is full). dispenser 4. Carefully shake the funnel by its handle to get the last granules inside. 5. Remove the salt around the opening of the salt container.

  • Page 14: Daily Use

    9. DAILY USE 9.2 Setting and starting a 1. Open the water tap. 2. Press the on/off button to activate programme the appliance. Make sure that the appliance is in The Auto Off function programme selection mode. • If the salt indicator is on, fill the This function decreases energy salt container.

  • Page 15: Hints And Tips

    ENGLISH Opening the door while the Press and hold RESET until the appliance is in programme selection mode. appliance operates Cancelling the programme Opening the door while a programme is running stops the appliance. It may affect Press and hold RESET until the appliance the energy consumption and the is in programme selection mode.
  • Page 16 • In areas with hard and very hard water • Remove remaining food from the we recommend to use plain items. dishwasher detergent (powder, gel, • Make soft the remaining burned food tablets containing no additional on the items.

  • Page 17: Care And Cleaning

    ENGLISH 11. CARE AND CLEANING WARNING! Before maintenance, deactivate the appliance and disconnect the mains plug from the main socket. Dirty filters and clogged spray arms decrease the washing results. Make a 4. Wash the filters. check regularly and, if necessary, clean them.

  • Page 18: Troubleshooting

    11.3 External cleaning • Clean the appliance with a moist soft cloth. • Only use neutral detergents. • Do not use abrasive products, abrasive cleaning pads or solvents. 11.4 Internal cleaning • Carefully clean the appliance, including the rubber gasket of the door, with a soft damp cloth.
  • Page 19 ENGLISH Problem and alarm code Possible cause and solution The program does not start. • Make sure that the appliance door is closed. • If the delay start is set, cancel the setting or wait for the end of the countdown. •...
  • Page 20 Problem and alarm code Possible cause and solution The appliance trips the cir- • The amperage is insufficient to supply simultaneously all cuit-beaker. the appliances in use. Check the socket amperage and the capacity of the meter or turn off one of the applian- ces in use.
  • Page 21 ENGLISH Problem Possible cause and solution The dishes are wet. • For the best drying performance activate the option XtraDry and set AirDry . • The programme does not have a drying phase or has a drying phase with low temperature. •...

  • Page 22: Product Information Sheet

    13. PRODUCT INFORMATION SHEET Trade Mark Model FSS52615Z 911536306 Rated capacity (standard place settings) Energy efficiency class Energy consumption in kWh per year, based on 280 standard cleaning cycles using cold water fill and the consumption of the low power modes.
  • Page 23 ENGLISH Water supply pressure Min. / max. 0.5 (0.05) / 8 (0.8) bar (MPa) Water supply max 60 °C Cold water or hot water 1) Refer to the rating plate for other values. 2) If the hot water comes from alternative source of energy (e.g. solar panels), use the hot water supply to decrease energy consumption.
  • Page 24 www.aeg.com/shop...

Table of Contents