GoPro Omni Manual

Hide thumbs Also See for Omni:

Pre-Check: M ake sure all GoPro's have been f ully

1) Turn on Omni by locating camera #1

and holding "Mode" until the red light

flashes

a) The rest of the cameras should

turn on automatically, however

you can turn them on manually

if they don't.

2) The #1 Camera controls the entire

Omni and will display a flashing "AR"

and "Array Ready" when it is ready to

be used

3) Begin recording with the top red

button on camera #1, and then stop

recording with the same button

4) Turn off the Omni with camera #1 by

holding "Mode" until the red light

flashes

GoPro Omni Guide

charged and have formatted SD cards

Table of Contents

Need help?

Do you have a question about the Omni and is the answer not in the manual?

Page 1 GoPro Omni Guide Pre-Check: M ake sure all GoPro’s have been f ully charged and have formatted SD cards 1) Turn on Omni by locating camera #1 and holding “Mode” until the red light flashes a) The rest of the cameras should...
Page 2 5) Plug in the USB and power adapter for it to the Animation Station. Turn on Omni with camera #1, all the cameras should enter USB mode. Move all videos to be synced/stitched into one folder on VideoHD. In other words, the 6 .mp4 files should all be in one...
Page 3 8) Go to render, select settings (usually H.264 is the best option here as it is usually the most compatible with various players and web players such as YouTube, Facebook, and GoPro VR Player...