NEC IECUBE2 User Manual page 4

In-circuit emulator v850e2m microcontroller
Table of Contents

Advertisement

User's Manual(Preliminary) IECUBE2 main (QB-V850E2)
1. Circumstances not covered by product guarantee
 If the product was disassembled, altered, or repaired by the customer
 If it was dropped, broken, or given another strong shock
 Use at overvoltage, use outside guaranteed temperature range, storing outside guaranteed
temperature range
 If power was turned on while the AC adapter, USB interface cable, or connection to the target
system was in an unsatisfactory state
 If the cable of the AC adapter, the USB interface cable, the POD probe, or the like was bent or
pulled excessively
When using an AC adapter not supported in the region of use
 If the product got wet
 If this product is connected to the target system when there is a potential difference between the
GND of this product and GND of the target system.
 If the connectors or cables are plugged/unplugged while this product is in the power-on state.
 If excessive load is applied to the connectors or sockets.
 If a metal part of the power switch, cooling fan, or another such part comes in contact with an
electrostatic charge
 If the product is used or stored in an environment where it may likely be exposed to electrostatic
discharge or electrical noise
2. Safety precautions
 If used for a long time, the product may become hot (50C to 60C). Be careful of low
temperature burns and other dangers due to the product becoming hot.
 Be careful of electrical shock. There is a danger of electrical shock if the product is used as
described above in 1 Circumstances not covered by product guarantee.
ZUD-CD-10-0092
4/19

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IECUBE2 and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Qb-v850e2

Table of Contents