Advertisement
Charging the Battery
Important: The first time you charge the battery, be sure to charge it fully.
Do not use the DC power cord to do so; instead use AC power.
Note: The battery will begin charging whenever you connect the device to an
AC outlet, regardless of whether or not it is in use.
To charge the battery using the AC Power Cord provided with your system,
follow these steps.
1.
Connect the AC Power Supply's output cable to the SimplyGo Mini
power input connector.
2.
Connect the AC Power Cord's connector into the AC power supply.
3.
Connect the AC Power Cord's plug into an AC outlet installed to meet
national or regional electrical code
Note: The AC Power Supply is equipped with a green light, which illuminates
as soon as you connect the device to an energized AC power source.
4.
When charging is complete (this takes four hours or less for the
standard battery), disconnect the AC Power Supply and store it with
the AC Power Cord for future use.
.
Advertisement
