Philips PTA128 - Wireless USB Adapter Guide

Connect the wireless adapter

Recommended position of the wireless USB adapter for TV.

1. Switch off the TV.
2. Connect the USB wireless adapter to the extension cable.
3. Follow the recommended position of the adapter.
4. Connect the other end of the extension cable to the side USB connector on the TV.

Setup the wireless network

1. Switch on the TV.
2. Follow the onscreen instructions to setup the wireless network:
   • If your router has Wi-Fi Protected Setup (WPS), you can use it to setup the wireless network.
   • If your router does not have WPS, you need to enter the WPA passphrase or WEP security key of the router.

System requirements

• A home network with a wireless router.

Safety

Before using the product, read all accompanying safety information.

• The product may contain small parts, which can be swallowed. Keep these parts out of reach of babies and children at all times.
• Never expose the product to rain, water or any form of liquid. It may damage the product.

• Never place the product near naked flames or other heat sources, including direct sunlight.

Register your product and get support at www.philips.com/welcome