Table of Contents
Advertisement
REMOTE CONTROL BUTTONS & FEATURES
Power
SOURCE
Mute
Volume
Inserting Battery before using the Remote Control
1. Use a suitable coin to turn the remote control's battery cover
counterclockwise to remove it as shown in the figure below.
2. Insert a 3V lithium battery. Keep the positive (+) pole facing up when
inserting the battery. Put the battery cover on, and then align the '●'
marks side by side as shown in the figure below.
3. Use a suitable coin to turn the remote control battery cover clockwise
as far as it will go to fix it in place.
Turns the Soundbar on and off.
Press to select a source connected to the Soundbar.
Sets the volume temporarily to 0.
Press again to cancel.
Adjusts the volume level of the unit.
· 17 · English
Advertisement
Table of Contents
