Operation And Maintenance - Microsensor MPM4730 Operation Manual

MPM4730/4700 Intelligent pressure/level Transmitter
Special Cable （connect to transmitter）
Connection Box（connect to transmitter）
User's Manual
Qualification Tracking Card
Converted Interface
Software
5.3 Storage
The transmitter shall be stored in a dry and ventilated room with a
temperature of -40℃ ~ 85℃(4730 4-pin Plug,7-pin Plug), -20℃ ~ 85℃
(4730 Cable type ,4700) and a relative humidity ≤85%. There is no
corrosive gas in the indoor air to the transmitter.

6 Operation and Maintenance

6.1 Operation
Customers do not need to make any adjustments to the transmitter to put
it into operation.Before putting into operation, please check the
installation and electrical connection again.After confirming the correct
electrical connection, switch on the power, preheat for 15min and put into
operation.
6.2 Maintenance
MPM4730/4700 intelligent pressure/level transmitter does not need
regular maintenance. However, please pay attention to the following
items for better operation.
the length due to the order
due to the order
due to the order
15
1
due to the order
1
1