Summary of Contents for Amada Homefurnishing Floating Shelf AMFS01
Page 1
Floating Shelf Instruction Manual V1.0 Model: AMFS01/AMFS04 Thank you for choosing this AMADA product! At AMADA we strive to provide you with the best quality products and services in the industry. Should you have any issues, please don't hesitate to contact us at amada_supportus@163.com. IMPORTANT SAFTY INFORMATION •...
Page 2
Tools Needed (Not lncluded) 5/64 in.(2mm) 15/64 in.(6mm) Stud Finder Screwdriver Drill Level Pencil Wood Drill Concrete Drill Supplied Parts and Hardware List Metal Frame Towel Rack Screws with Shelf Long Lag Screw Short Lag Screw M4x50mm M4x30mm Wall Anchor Wall Anchor CAUTION! CAUTION!
Page 3
Step 1 Secure the Tower Rack [02] to the Shelf on the Mental Frame [01] Secure the tower rack [02] to bottom of the shelf using four short screws [03]. Step 2 Secure Metal Frame with Shelf to Wall Before installation, please identify your wall type. For wood stud installation, follow the step 2A.
Page 4
Position the metal frame with shelf at your desired height and line up the holes with your stud center line. Level the shelf and mark the holes. 1.2 in.(30mm) 2 in.(50mm) ø5/64 in.(ø2mm) ø5/64 in.(ø2mm) For Short Lag Screw For Long Lag Screw [Not Included] [Optional] WARNING:...
Page 5
Step 2B For Drywall Position the metal frame with shelf [01] at your desired height and make sure the metal frame with shelf [01] is level and flush to the dry wall. Mark the holes for the wall anchors [C]. Press and screw wall anchors [C] into the drywall using a screwdriver and turn clockwise.
Page 6
Step 2C For Solid Concrete and Concrete Block Walls Position the metal frame with shelf [01] at your desired height and make sure the metal frame with shelf [01] is level and flush to the solid concrete and concrete block walls. Mark the holes for the wall anchors [D].
Page 7
Use the hammer to knock wall anchors [D] into the wall. Be sure the anchors [D] are seated flush with the concrete surface. Install the metal frame with shelf [01] using short lag screws [B] and wall anchors [D], tighten short lag screws [B] until they are pulled firmly against the metal fame.
Page 8
Thank you again for choosing this AMADA product! Thank you for choosing this AMADA product! At AMADA we strive to provide you with the best quality products and services in the industry. Should you have any issues, please don't hesitate to contact us at amada_supportus@163.com.
Need help?
Do you have a question about the Floating Shelf AMFS01 and is the answer not in the manual?
Questions and answers