Repotec RP-IMC811FP User Manual

with 1 x 10/100/1000M TX 30W PSE + 1 x 100/1000M SFP, 48-56 VDC input
This Equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own expense.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received; including interference that may cause undesired operation.
This equipment complies with the requirements relating to electromagnetic compatibility, EN
55032/35 class A for ITE, the essential protection requirement of Council Directive 2014/30/EC
on the approximation of the laws of the Member States relating to electromagnetic compatibility.
Company has an on-going policy of upgrading its products and it may be possible that
information in this document is not up-to-date. Please check with your local distributors for the
latest information. No part of this document can be copied or reproduced in any form without
written consent from the company.
Trademarks:
All trade names and trademarks are the properties of their respective companies.
User Manual
Industrial Gigabit PoE Media Converter,
FCC MARKING
when the
CE MARKING
Copyright © 2022, All Rights Reserved.
equipment is operated
1
in a commercial