Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Repotec RP-1002MG
Summary of Contents for Repotec RP-1002MG
- Page 1 1000BASE-T to mini-GBIC Gigabit Ethernet Media Converter Quick Installation Guide...
-
Page 2: Fcc Class B Certification
FCC Class B Certification This equipment has been tested and found to comply with the regulations for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. -
Page 3: About Media Converter
Introduction Thank you for choosing the 1000BASE-T to mini-GBIC Gigabit Ethernet Media Converter, The Converter introduced here provides one channel media conversion between 1000BASE-T 1000BASE-SX/LX through mini-GBIC module. About Media Converter Media Converter is a network technology specified by IEEE 802.3ab 1000BASE-T and IEEE 802.3z 1000BASE-SX/LX standards. -
Page 4: Product Features
Product Features One-channel media conversion between 1000BASE-T and 1000BASE-SX/LX with mini-GBIC slot Fiber media allows: multi-mode fiber and single-mode fiber using LC connector Link Pass Through function Auto negotiation of duplex mode on TX port Auto MDI/MDI-X for TX port ... -
Page 5: Installation
Installation This chapter gives step-by-step installation instructions for the Converter. Selecting a Site for the Equipment As with any electric device, you should place the equipment where it will not be subjected to extreme temperatures, humidity, electromagnetic interference. Specifically, the site select should meet... -
Page 6: Connecting To Power
Connecting to Power This Converter is a plug-and-play device. Connect the supplied AC to DC power adaptor with power voltage 7.5Vdc/1.5Amp to the DC-Jack on the converter, and then attach the plug into a standard AC outlet. Installing in a Chassis The Converter can be fit into any of the expansion slots on a special designed chassis. - Page 7 Monitoring Converter through Management Module There is a management module that can control this media converter through the chassis system, this media converter can be controlled through Web Browser, SNMP and terminal emulation program. The management module will detect the default reset on the DIP switches and display out the status, also the management module can control the function through the chassis system.
-
Page 8: Led Indicator
NOTE: To control the function in a working station, need to collocate together with optional Chassis System and Management Module. LED Indicator The LED indicators give you instant feedback on status of the converter: LEDs State Indication Lights on Power on (Power) Lights off Power off... -
Page 9: Link Pass Through Function
Link Pass Through Function LLCF (Link Loss Carry Forward) When a device connected to the converter and the TP line loss the link, the converter’s fiber will disconnect the link of transmit, so that the other ends will know that there is a linkage error on this end. - Page 10 LLR (Link Loss Return) When a device connected to the converter and the fiber line loss the link, the converter’s fiber will disconnect the link of transmit. There is a switch to enable or disable the function of the media converter. The table below shows how LLR function is working: Media Converter Auto-Negotiation...
- Page 11 Switch 1 : On -> Forced Mode Off -> Auto Negotiation mode Switch 2 : On -> LLR enable Off -> LLR disable Switch There is a two pin DIP switch on the module which defines as switch 1 and switch 2: Switch 1: Fiber mode switch When the switch was turned to “On”, it means that the fiber was turned to forced mode, and...
-
Page 12: Specifications
Specifications Standards: IEEE802.3ab 1000BASE-T IEEE802.3z 1000BASE-SX/LX Data Transfer Rate: 2000Mbps Duplex Mode: Full Duplex Mode LED indicators: PWR, LNK/ACT Cable 1000BASE-T -- 4 pair Cat. 5, EIA/TIA-568 100-ohm screened twisted-pair (STP), up to 100m 1000BASE-SX -- 62.5/125μm multi-mode fiber optic cable, up to 220m 50/125μm multi-mode fiber optic cable, up to 550m...